Technotiger- mesh to r300 printing

  lynnmhughes 11:46 21 Jul 05

It prints perfect direct from memory cards, just the printing from computer that goes wrong. all programms the same problem.

  jack 12:19 21 Jul 05

the printer is fine then and it seems to be a driver to printer problem
modern printers and Epson in particular are very fussy about how the drivers are set up
A look in the left search field say R300-
will reveal much.
Essentually the software must be installed before the printer is plugged in and activated.
So try this
Go to START/Printers and faxes - click to open-right click on the R300 icon and delete.
Re start the machine.
Make sure the printer is powered off and the USB cord is out.
New reinstall the software and activiate the printer only when told to do so.
You could also go to the Epson website and download the latest driver.

  Technotiger 12:27 21 Jul 05

Me again - before I go any further - just a word of advise about Posting on this Forum - Please keep your Posts all together in one thread, you do not need to start a new Thread for each answer. I have added your original thread here for all to see. Please now stay 'within' this Thread. Don't worry, you will soon get used to it here.

click here

I would advise that you follow jack's suggestion.


This thread is now locked and can not be replied to.

Hands-on: Samsung Galaxy S8 review

1995-2015: How technology has changed the world in 20 years

Samsung's beautifully designed Galaxy S8 makes for better VR experiences too

47 iPhone camera tips to help you take better photos