System Panel Header setup

  Sparkly 17:18 13 Feb 06

Hi guys In my M/B hand book the wireing setup on the 9pin panel on my system front panel header the diagram shows HDLED-/HDLED+ .My HDDLED wires are red/white, My power wires are orange/white and the pin setup is powerbtn# alongside a gnd pin.My Reset switch wires are blue/white in the book the pins are reset# alongside a dummy and the wires gointo a double connecter and on the back, the red blue and orange go into a connecter with a little triangle on the one side do i take this as the + connecter ??? thanks again for any help.

  Skyver 17:30 13 Feb 06

It won't matter if you put it on the wrong way round, if the light doesn't illuminate just put the connector on the other way round.

  DieSse 19:23 13 Feb 06

And the switches will work either way round.

  Totally-braindead 19:31 13 Feb 06

The only thing you have to be wary of as far as I know are the front USB connectors if you have them, if connected wrongly the can damage the motherboard, the LEDs and power switches will do no harm if connected the wrong way round.

  quack 19:55 13 Feb 06

As a general rule the coloured wires are + the white are -

  Sparkly 09:02 14 Feb 06

Thanks guys great help.

This thread is now locked and can not be replied to.

Huawei P10 review

1995-2015: How technology has changed the world in 20 years

An overview: What leading creative agencies are doing to improve diversity

New iPad, iPhone SE & Red iPhone 7 on sale now