spool32 error occasionally on startup

  naviator 12:55 30 Aug 03
Locked

Error message appears when W98 is booting up and just before McAfee VirusScan loads. When this is cancelled system does not close down but if not re-started errors do appear although not associated with printing. Re-starting solves the problem but the initial error is frustrating. Can this be eliminated? Computer is new - 1300MHz AMD Duron processor, 44GB hard drive, 256MB memory module, main circuit board K7VM2 2.00.

  citadel 16:52 30 Aug 03

It is caused by printer. I had this problem but it seems to have cleared up by itself. I always had to re-boot whe I got the spooll 32 message or the computer would freeze. The printer icon usually did not appear on the tool bar. Maybe one of the Microsoft updates fixed it.

  -pops- 06:45 31 Aug 03

Is your printer switched on before the computer boots up? If not, try switching it on before boot. If it is, try not switching on until after boot up.

If neither of those work, remove all references to the printer(s) and then re-install their drivers and all associated software (ink monitors and things).

This thread is now locked and can not be replied to.

Qualcomm Snapdragon 835 benchmarks: Antutu, Geekbench 4, GFXBench and PCMark results

1995-2015: How technology has changed the world in 20 years

This animated short film tells a moving story of domestic violence for Refuge

New iPad 2017 preview: Apple's affordable but underspecced new iPad may appeal to the education…