Speedtouch 536 Password Problem

  numskull 19:25 02 Nov 06
Locked

I have just bought the above seeing as my 530 is now obsolete but many years of good service from it.
Problem is I cannot change the password on the Web interface and end up having to reboot the modem.
I have seen various forums stating:-
Password = blank
Username = Admin, Password = Admin

Even if I try to create and change user (password should be the same as username) nothing happens and I cannot access the Web interface unless I reset to factory default!

Can anyone assist?

  anskyber 19:41 02 Nov 06

I have the same Speedtouch and I simply got access the short way which is the NAT configuration. click here

  anskyber 19:43 02 Nov 06

Sorry, re-reading your post I don't think that is what you were asking.

  FreeCell 19:51 02 Nov 06

Manual says default user is "administrator" and password blank.

My 580 was "admin" and "admin" Other routers I have used have defaults as user = "admin" password = 1234 or 12345.

  baldtaco 02:00 03 Nov 06

I've never played with the 536 but other Speedtouches I've meddled with have a reset switch on the back. You get at it with a paperclip in the manner you would to eject a stubborn optical drive, save for in this case rather than mechanical force you're depressing a minuscule switch for a 20 seconds [or 'till lights indicate some sort of happening]. Worth a looksie.

  numskull 11:15 13 Nov 06

Here is Speedtouch Tech Help's solution:-

First of all run a fresh setup without making any changes to the modem security settings
Then proceed by opening a telnet session with the modem (open a CMD prompt on your PC and type: telnet 192.168.1.254 <enter>).

When asked for username type: Administrator
and leave the password blank.

When you are granted access to the modem type: user flush <enter>

All users have now been deleted.

Exit the telnetsession, and re-open the telnetsession.
This time, use no username and password.
Type menu, go to the users menu.

Go to 'add' by using the arrows on your keyboard

Add a new user with the following settings:

name: name of user
Password: password of user
role: SuperUser

The other fields can be left blank.

Then by using the tab-key to select OK <enter>.
Move out of the menu by selecting Cancel (possibly several times).

When you are back at the prompt type: saveall <enter>
You can now close the cmd window.

You will now have enabled the protection on the modem interface.

Not tried it yet though.

This thread is now locked and can not be replied to.

How to get Windows 10 for free | How to install Windows 10: There is still a way to avoid paying…

1995-2015: How technology has changed the world in 20 years

Alex Chinneck’s giant ice cube Christmas tree at Kings Cross

Apple rumours & predictions 2017: The iPhone 8, new iPads, and everything else you should expect fr7…