Senao SL2611CB3+DX strange gateway problem.

  manabc3000 03:08 25 Jun 06
Locked

Hello,

I am using the following configuration.

(Internet connectivity)
10.1.3.1 - 10.1.3.255 and 10.35.204.1 - 10.35.204.255. (def gateways:10.1.3.1 and 10.35.204.1).

||

SL2611CB3+DX (Client Mode)

||

Micronet 1 watt modem (AP Mode)

||

Clients.



Now my problem is that when I give any default gateway(255.255.255.255 or 0.0.0.0 or 192.168.1.1 or anything) to the senao bridge , the internet with 10.35.204.1 series works fine. But it starts trouble in 10.1.3.1 series. The gateway can be pinged on the clients but the internet doesn't work as in tracert the clients are not routed to 10.1.1.1. But if I change the default gateway of senao to 10.1.3.1 , it works fine but now the problem starts appearing in 10.35.204.0 network. again 10.35.204.1 (gateway) can be pinged but not able to browse the net. Please note that network 10.35.208.0 works fine with any default gateway in senao except 10.1.3.1 and 10.1.3.0 network works fine only with 10.1.3.1 as a default gateway in the bridge. Please advise me what to do at earliest. Regards and thanks in advance.

  mgmcc 08:39 25 Jun 06

What Subnet Mask are you using throughout the network? For your different subnets to communicate, it should probably be 255.0.0.0

  manabc3000 02:34 26 Jun 06

Thanks for reply. Where do u suggest putting subnet ? in client ? I have tested it but it is not working. Please help if having any other clue.

  mgmcc 08:45 26 Jun 06

Every device in your network that has an IP address will also have a Subnet Mask, whose purpose is to "mask" different subnets so they are kept separate from one another.

With 10.x.x.x networks, the Subnet Mask of 255.0.0.0 is normally used to allow all devices in the network to communicate. Now I don't know why you have two different subnets configured in your network, and whether they need to be kept separate, but unless they both have access to the Default Gateway address, only the one in the same subnet as the router will have internet access.

Try setting the router's Subnet Mask to 255.0.0.0 (if it will let you) and see if that allows the whole network access it.

  manabc3000 04:05 28 Jun 06

Thanks again for reply.
Basically I have to use to subnets because I have connectivity of two isps. Therefore both subnets have different gateways. But the problen is that in one case , there is no effect of gateway in access point, while it stops working only on one gateway setting i.e 10.1.3.1 . While the other case (I mean ISP), the whole thing works only with gateway setting 10.1.3.1. The problem is severe. No effect of setting up 255.0.0.0 as subnet. While the thing to be noted is that in everycase , i am able to ping both the gateways. Only internet surfing gives problem.
Plz help.

  mgmcc 08:08 28 Jun 06

Sorry, you've totally lost me. Perhaps someone else can follow what you are trying to do and step in to help.

This thread is now locked and can not be replied to.

Surface Pro 5 News - release date, UK price, features, specs

Gear VR vs. Daydream: Which delivers the best VR experience?

Best Mac antivirus 2017