Sempron 2600 or Athlon XP 2600

  Ballie 09:40 06 Apr 05
Locked

I am about to upgrade a friends pc from an old Intel 800mhz to a AMD 2600 machine, but I would like to ask should I buy a Sempron 2600 or a Athlon XP 2600 ? I think that the Athlon XP would be better but would like others opinion please.

Also both of these cpu's are 333mhz so when buying the ram for his new machine should I buy pc 2700 (333mhz) to match the cpu speed or could you fit pc 3200 (400mhz) the reason I ask this is that the pc3200 is only anout £2 more but will the pc 3200 run ok at 333mhz ?

The new mother board can take up to 400mhz cpu's or ram.

  Monument 09:49 06 Apr 05

The Athlon 2600+ is the better processor.

It is always better to match the speed of the memory to the CPU although the PC3200 would work.

  jbp1982 10:05 06 Apr 05

Is a barton core not an idea?? Athlon XP 3200+ has 400Mhz FSB.

  dan11 10:32 06 Apr 05

If the XP2600+ is the barton core 1.91 ghz( 512K cache ), this will be the best one to put in.

A AXDA2600DKV3D 2600+ thoroughbred runs at 2.08Ghz. The sempron runs at 1.83Ghz. Both have 256K cache.

Some motherboards will not allow you to run different memory speeds if you use a 333Mhz processor, most DO. Read the manual and it will tell you if you can use the faster ram.

Some motherboards allow you to run the ram at 400Mhz, even though the cpu is 333Mhz. i.e. by SPD. Again read the manual, it will tell you.

  Ballie 11:03 06 Apr 05

Thanks all, it is the Athlon xp 2600 Barton core (from overclockers) I will download the manual from MSI to see about the cpu/ram speed with regards to jbp1982 comment, yes I agree but its not my money and my friend is on a tight budget.

Just one more question for dan11 you say that the "XP2600+ barton core runs at 1.91 ghz" then you say that the "AXDA2600DKV3D 2600+ thoroughbred runs at 2.08Ghz" do you mean it will over clock to this?

  dan11 15:08 06 Apr 05

They are 4 2600+ amd chips

1) the barton 1.91 Ghz (512 cache ) 333fsb

2)the thoroughbred 2.08 Ghz ( 256 cache ) 333fsb

3)the thoroughbred 2.13 ghz ( 256 cache ) 266fsb

4)the sempron 1.83Ghz ( 256 cache ) 333fsb

These are the recommended speeds for the chips.

" XP2600+ barton core runs at 1.91 ghz" then you say that the "AXDA2600DKV3D 2600+ thoroughbred runs at 2.08Ghz" do you mean it will over clock to this? "

these are two separate chips and clock speeds.

Certain barton 2600+ cpu's have been know to be clocked upto 2.3 ghz. This would depend on the motherboard, memory, cooling and chip. It is something I would not recommend.;-)

This thread is now locked and can not be replied to.

Hands-on: Acer Predator Triton 700 review

D&AD Awards 2017: see the best design, advertising, illustration, animation and VR of the past year

How to lose weight with an Apple Watch