//some 3rd party need geo

PSU blowing fuse

  mbjb 16:10 26 Oct 03

What rating should i use for my computers Power supply mains lead fuse?

I have had 2 3amp fuses blow so would i be safe with a 5amp?

a brief summary of the system is as follows

350 watt psu
Athlon XP 2500 Processor
2 hard drives
cdr drive
dvd rom drive
512 megs ddr


  graham√ 16:12 26 Oct 03

I would try a 5 Amp fuse. If that blows it's pretty certain you have a problem!

  A_World_Maker 16:26 26 Oct 03

Surely it doesnt matter what the rating of the incoming supply is, there is an internal fuse on all the systems I used/owned?

  A_World_Maker 16:27 26 Oct 03

the internal fuse is normally rated at 5 amps.... so anything above that should suffice

  SGT BARNES 16:32 26 Oct 03

make sure you haven't got a live connector or wire of some kind touching anything metal inside the case.

i've done this a few times when playing with the inside of the pc , i've unpluged the side panel fan , messed about a bit then turned the pc on without thinking , and the fan power cable has touched something and BANG , dead psu , new fuse and its sorted , its only a matter of time till something worse happen.

  mbjb 16:57 26 Oct 03

Thanks for all the help,after taking a look inside the pc and checking the cables i did notice that on the psu label, it has printed 230v ~ 4a
so i guess the 3a fuse was too small

This thread is now locked and can not be replied to.

What is Google Allo? What is Google Duo? Google Allo UK release date rumours and features: Google…

1995-2015: How technology has changed the world in 20 years

These clever designs help visualise a complex intelligence tool

iOS 10 troubleshooting tips: Simple fixes for the most common iOS 10 problems, from network…