Surface Pro (2017) vs Surface Pro 4
My desktop pc has an Athlon 64x2 4200+ processor and 2
GB of RAM, with XP2 Pro. I have a Linksys WRT54GS
Broadband Router and am connected with Virgin Media.
My daughter has given me an old laptop a, Toshiba
Satellite Pro 4600 with a Celeron 747MHz Processor,
384MB of RAM and XP2 Pro it has an Intel Pro/100 VE
Network adaptor. I have fitted a Linksys Wireless-G
Notebook Adaptor with SRX (Model No WPC45GX), so that I
can use it around the house. However when I try to
connect to the home network, although it "finds" a list
of networks, I am unable to connect, and get an error
message - "Windows is unable to connect to the selected
network (my home network). The network may no longer be
in range. Please refresh the list of available
networks, and try again." I have tried connecting with
the laptop in the same room as the router, but get the
In Device Manager, under Network adaptors, both are
shown, and both are working correctly, but in the
taskbar there is a red cross shown on both icons, one
says that a network cable is unpluged,but I don't have
a network cable fitted. The other tells me that the
wireless is not connected.
I presume that the adaptor is working as it can "see"
wireless networks, plus I have used Lynksys support to
check that all the settings on both Router and Adaptor
My wife has a new laptop and is able to connect to the
home network without any problem.
Please can anyone offer any advice or assistance.
I haven't tried that, will give it a go, Thanks.
if still having problems, have you checked that wireless on the laptop is "switched on". On my laptop there are keys to press in order to toggle wireless on or off.
Check that the wireless channel setting being used by the wireless router and the laptop card are the same, or is set to automatic in the case of the laptop card
if they are ok then look in the laptop wireless network cards advanced properties for a speed setting option, selecting the lowest available speed (G being the highest)will often helps with stability and conectivity issues
I have had to buy a new ethernet cable to see if I can connect directly, will try tomorrow, along with all the other solutions,and keep you informed. Thanks for the terrific responses.
Yes I can connect using an ethernet cable, and I suspect now that this laptop is not wireless enabled. The Toshiba website, gives the following spec for my model "with intergrated wireless LAN module on all Pentium III models, on board 10/100 Ethernet NIC". My laptop has a Celeron Processor.
Can anyone tell me how I can check if it is wireless enabled, or does the fitting of a Notebook Adaptor make it wireless enabled? I can connect to the internet using an ethernet cable plugged into the router, but am still unable to conncet by wireless.
I have downloaded all the Windows updates available as well as IE7 onto the laptop while it was conneced (there were 97!) so it is up to date.
Have you tried turning on the WiFi by way of the switch on laptop?
Yes there is a switch on the left hand front side, and that is on the "on" position.
Do you see any other networks with a similar or identical name to your LinkSys, or is it a unique name?
Yes I can see other wireless networks in the area besides my home network. A thought has just occured to me; when I try to connect to my home network, it tries to connect straight away, if I try to connect to other networks which are found, I am prompted to provide a security key, so I don't bother. Is this normal? I am new to wireless networking.
This thread is now locked and can not be replied to.