Power problems

  chrisjmat 20:32 22 Dec 08
Locked

Hello,

I have just moved my PC to the states. The power unit in my pc says max 300 watts. I have bought a step down transformer rated 500 watts. However when I start trying to play games etc the PC shuts down. I am running XP home. I think I will need to actually have to change my PC power unit for a 110 input. Is there anything I can check before doing this? I think my step dowm transformer cannot cope with the load. Any help would be appreciated and if I change the unit will a 400 watts rated one work fine?

Many thanks

Chris

  Fruit Bat /\0/\ 21:11 22 Dec 08

I change the unit will a 400 watts rated one work fine?

If renewing a PSU check:

1. The physical size of your PSU, some are hard to replace due to being a non standard size.
2. The amount of power need from the PSU don't skimp.
3 The correct connections for your equipment

1. Physical Dimensions

Besides the specs and form factors, the physical dimensions are also important factors in selecting a compatible power supply. Here is an outline of the physical dimensions of most standard power supplies:

# ATX: 6x3.5x5.5", HxWxD. Most common. Uses 4 mounting screws.
# Mini-ATX: 5x3.5x5", HxWxD. Rare size. Uses 4 mounting screws. Can be used in a regular ATX case, but often not the other way around.
# MicroATX: 5x3x4", HxWxD. Use 3 mounting screws. Not interchangeable with ATX or miniATX.
# Flex ATX: Even smaller than Micro ATX. Various sizes according to case specs; often not interchangeable.

Use the data above to determine if a particular power supply would fit your case.

The quality of a power supply can be estimated by its weight. While this is not a true scientific or thorough measurement of the power supply reliability, it is nevertheless a very simple and easy way for ordinary PC users to estimate and compare the quality of a power supply. Why weight matters click here

2. Power supply calculator click here

3. Correct connections
Some boards have 20 pin connectors others 24 pin
There is often a 4 pin plug required to power Intel CPUs
Molex D plugs for IDE HDD and CD/DVD drives
SATA power connections for latest HDDs and DVD drives.


Guide to changing PSU
click here
click here

  Switcher 22:41 22 Dec 08

"I have bought a step down transformer"

There is usually a slide switch on the back of the PSU to allow an input voltage change from 230V to 110V.

This thread is now locked and can not be replied to.

Surface Pro (2017) vs Surface Pro 4

20 groundbreaking 3D animation techniques

How to mine Bitcoin on Mac