Post not listed

  ponytail 17:44 11 Sep 11
Locked

I have now sent ths post twice but it does not appear in my list of posts anyone know why.

My current hard drive has the following capacity Used Space 75.3gb Free Space 36.4gb Capacity 111gb I did have a Western Digital 40gb drive which developed a fault and has been taken out.I would like to install a replacement which is this one http://www.ebay.co.uk/itm/Western-Digital-1TB-3-5-SATA2-64MB-Hard-Drive-WD10EARS-/140591021779?pt=UKComputingHardDrives_RL&hash=item20bbe0bed3 Can someone advise as I have never installed a hard drive before and wondered what was involved ie how is it done.I do have a 1Terrabyte external drive on which I keep my important stuff iot is a iomega drive.Would like to know what others think about installing a 2nd drive and how easy it is.

  rdave13 18:10 11 Sep 11

15p cheaper at Amazon and pretty easy to return if faulty.

Disconnect power and open case. Select a bay for your hard drive and screw in to place. Insert power and sata cable to hdd. Insert other end of sata cable to socket in motherboard. C: drive usually on sata socket numbered 0 or 1. New drive should be on sata socket numbered 2 ( or 1 if C: on 0). I can't see if it's OEM on the ebay site but is on Amazon. That means you'll have to buy a Sata cable. You can pinch two of the machine screws , one from opposite sides, of the C: drive to fix the new drive until you can get some more.

  rdave13 18:40 11 Sep 11

If you don't get seasick then this YouTube video shows you how to physically install the drive but do power off first.

Gives an idea of how to.

This thread is now locked and can not be replied to.

Huawei P10 review

1995-2015: How technology has changed the world in 20 years

An overview: What leading creative agencies are doing to improve diversity

New iPad, iPhone SE & Red iPhone 7 on sale now