please help "problem with networking"

  A.A.A 08:49 22 Sep 03
Locked

hello to all members,
i tried (nTimes)to set up a network @home, first PC run XPpro and 2nd one(quite old) run 95 (i tried with 98se too).
i instaled the hardwares and drivers-no problem-configure the net work protocol TCP/IP even add the NetBeui (because different OS), But the 2 PCs still dont talk to each other. I also tried the XP network set up wizard and follow all the steps, but still not contact between the two. all files and printers are shared.
any suggestions please. thank you in advance.

  altecsole 09:09 22 Sep 03

Have you given each machine an IP address and subnet mask?

If so, can you ping each other. Try pinging 127.0.0.1 and see if you get a reply.

  A.A.A 09:43 22 Sep 03

altecsole
thank you, i ping 127.0.0.1 (to test my LAN card itself) anf i got a reply. but when i ping 100.0.0.x (x number of my client) to check local set up. i got a (request timed out) on one pc and on the other ( host unreacable).
really apreciate

  spikeychris 09:56 22 Sep 03

Local host is working then. What cable are you using? Is the firewall disabled on XP?

  A.A.A 10:18 22 Sep 03

hi spikeychris
the cable is cat5 and firewall is enabled
cheers

  altecsole 10:24 22 Sep 03

Are you connecting via a hub or switch? If not, you need to use a crossover cable.

  spikeychris 10:35 22 Sep 03

As altecsole has said it HAS to be a X-over cable if your just connecting two machines direct.

Also XP's Network Setup Wizard will not run on Windows 95, so configure its
network settings manually. Go to Control Panel, Network and add
these network components

TCP/IP protocol

Client for Microsoft Networks

File and Printer Sharing for Microsoft Networks

Remove the NetBeui as you will not need it. Remove these network components if they're present

IPX/SPX protocol

Client for NetWare networks as you will not need them.

It's easier to install and configure TCP/IP on Windows 95 than
to install NetBEUI on Windows XP. And if you set up XP as an ICS
host, it will automatically configure TCP/IP on Windows 95.


Is there a DHCP server on your network? If so, configure Windows 95 to
obtain an IP address automatically. This would be the case if you
have a broadband router or if you enable Internet Connection Sharing
on Windows XP. (If XP is set up as the host).

If there's no DHCP server, you'll need to configure a static IP
addresses on both computers. Use 192.168.0.1 and 192.168.0.2, with a
subnet mask 255.255.255.0. on each machine.


As said earlier, if you set up Windows XP as an Internet Connection Sharing host,
it will share its Internet connection with 95 and automatically assign TCP/IP properties to it, so if you want to share the net it is the easiest way of doing it. click here for instructions on ICS for XP

If you don't use Internet Connection Sharing, you need to assign
static IP addresses to both computers.

On Windows XP:

1. Open the Network Connections folder.

2. Right click the network connection.

3. Click Properties.

4. Double click "Internet Protocol (TCP/IP).

5. Click "Use the following IP address".

6. Enter IP address 192.168.0.1.

7. Enter subnet mask 255.255.255.0.

Windows 95:

1. Go to Control Panel | Network.

2. Double click "TCP/IP->network adapter".

3. Click "Specify an IP address".

4. Enter IP address 192.168.0.2.

5. Enter subnet mask 255.255.255.0.

If you have installed XP on NTFS you will also have issues with file sharing but thats for another day.

Chris

This thread is now locked and can not be replied to.

iPhone 7 review: a range of small updates add up to an excellent phone

1995-2015: How technology has changed the world in 20 years

How New York’s Stylin’ Seniors became a golden social media campaign

23 Apple Watch tips & secret features: Master your Apple Watch, Apple Watch Series 1 or Apple…