PC wont boot with GFX card installed

  Possumwee 12:08 31 May 11

Hello all,

I have a problem with my desktop PC, it started by taking 1 or 2 attempts at turning it on to get a bios beep and the PC to boot. Once booted however the PC was fine and stable.

But the other day it just wouldnt boot, I got no bios beeps and no video output. I dismantled it and put it back together and now I have found that the pc will boot with no GFX card installed but wont with one. I have tried 2 different GFX cards and get the same problem.

Does anyone know what this could be? Could it be the PSU?

Any help is appreciated, thanks a lot!

  Possumwee 15:27 31 May 11

Oh just to add this PC was running and working fine for a good 3 years before this happened. Its not a new build.

  Fruit Bat /\0/\ 16:41 31 May 11

no bios beeps and no video output

which video output are you connected to?

Once you fit the card connect the monitor to the new card boot to BIOS disable onboard graphics - save and exit

If you cannot get to BIOS connected to the new card, connect to onboard graphics - boot to BIOS, disable on board graphics, save and exit connect monitoe to new card.

  woodchip 17:42 31 May 11

As above how do you know its booting if you cannot see anything on screen, and you would get several BIOS beeps if there was a graphics problem

  Possumwee 17:53 31 May 11

I have a BFG 680i mobo, it has an LED display and an onboard speaker so you can tell when its booting. With a GFX card installed, there are no beeps and the LED display is just --.

It wont boot with any GFX card connected (I have tried 2) and I dont believe it has onboard GFX. At least there is no monitor connection I can see.

  Fruit Bat /\0/\ 18:12 31 May 11

I have found that the pc will boot with no GFX card installed I dont believe it has onboard GFX. At least there is no monitor connection I can see.


it would be beeping without a graphics card and you can't see anything without a monitor connected??

  Possumwee 18:24 31 May 11

Not sure how to quote on here,

But the LED display shows the booting progress, and I get a bios beep with no gfx card installed. With no monitor I obviously cant tell if its booting properly but I get no beep codes and no error codes on the LED. Which means it should be booting properly.

But with a gfx card installed I get no beep and no LED progression display.

  woodchip 19:08 31 May 11

How can the display tell you its booting when it nothing to connect to on the PC

  Possumwee 22:43 31 May 11

Its not the monitor, as I said the mobo has an LED display on it which tells you when it boots successfully (it loads to 100%). I also get no error beep codes when no gfx card is installed which would indicate an unsuccessful boot.

With a gfx card installed the LED display shows nothing and I get no initial beep.

  Fruit Bat /\0/\ 10:57 01 Jun 11

Either faulty cards or faulty PCI slot.

  Possumwee 12:46 01 Jun 11

You think its the PCI slot?

Ive used 2 graphics cards, both of which worked in other PC's so that makes sense. I guess I need a new motherboard.

Thanks for the help!

This thread is now locked and can not be replied to.

Samsung Galaxy S8 review

1995-2015: How technology has changed the world in 20 years

What’s happening in VR right now: From psychedelic art to combat therapy

Siri not working? Try these troubleshooting fixes