Sniper Elite 4 review: Headshotting Nazis has never felt so good
I have a PC that I built for myself nearly 2 years ago which just recently turns off unexpectedly for no reason after being on for a while (the time length varies from many hours to 1 hour (it does not go through the shut down process, the power just goes off suddenly)
Can anyone suggest what could be wrong with it?
My system is as follows:
Asus A7N8X deluxe motherboard
AMD Athlon XP 3200+ Processor with AMD heatsink and fan.
Antec tower with 330 watt truepower power supply
Maxtor 120 gig HDD
mitsumi DVD ROM drive
NEC DVD RW drive
AGP 8X sapphire graphics card with 128Mb ram
I gig system ram
Windows XP pro
Could it be the temperature of the CPU turning it off? it is steady at about 57/58 degrees C
Could it be the Power supply? as I have read that if the CPU is not getting enough power it turns off to prevent system damage.
Any help would be gratefully received.
Unless actually faulty an Antec truepower 330w psu will be perfectly capable of powering your pc as is, and even should you upgrade your graphics card and add an extra hard drive it wont struggle!.Antec rate their psu's on continuous output----few pc's will need more than a continuous 330w.Your psu will provide peak output power well in excess of the rated output for short periods.
Things I would do if this was my pc:
Check the mains lead is securely attached to the psu.Or try another mains lead in case there is a fault in the one you already have.Additionally if you connect through the mains without a surge protector I would consider adding one.
Open the case and check for a build up of dust in the case ventilation holes and heatsink on the cpu/graphics card.Check that all fans are running ok.Remove and reseat the ram memory and check that all pci cards/graphics card are securely seated too.Check all connectors are pushed fully home especially the IDE ribbons/SATA cables.
Do as Diodorus Siculus suggests and check that the BIOS is not set to shut down on a fault and that it does not have a thermal cut-out set too low.
See what happens after that little lot!
BIOS does not have a thermal cut out temperature listed.
I already have a surge protector.
I have hoovered out the internal components of my PC and everything looks connected etc.
I will try the mains lead tip u mentioned and tell u how I get on. Thanks so far.
This thread is now locked and can not be replied to.