Huawei P9 review: An impressive flagship with a gorgeous design and an innovative dual-lens camera
The fan in my computer had become unattached/dislodged from the motherboard and I need fix it down to the motherboard. I am not sure how to do this and was wondering if someone could help me. When I start my PC I have to press F1 to boot it into windows and the PC does not want to start with the fan not working properly.
How this happened: The PC was dropped during a move and the fan became detached from the motherboard. It has been since just sitting on its own, and I'm not even sure if it is working properly.
I have attached photographs to assist this query:
CLOSE UP SHOT OF FAN [IMG]http://i40.tinypic.com/34ifhix.jpg[/IMG]
HOW THE FAN CURRENTLY SITS IN THE PC - UNATTACHED [IMG]http://i43.tinypic.com/2v3ouw5.jpg[/IMG]
WHERE THE FAN SHOULD GO 1? [IMG]http://i39.tinypic.com/1zexv5s.jpg[/IMG]
WHERE THE FAN SHOULD GO 2? [IMG]http://i42.tinypic.com/35l4tj9.jpg[/IMG]
FAN'S CLIPS [IMG]http://i42.tinypic.com/1eb6td.jpg[/IMG]
HOW THE CLIPS SIT ON THE FAN [IMG]http://i43.tinypic.com/11c9rnp.jpg[/IMG]
GENERAL SHOT OF PC AND FAN [IMG]http://i42.tinypic.com/4smz6d.jpg[/IMG]
If anyone could explain how to attach the fan, that would be great.
Also since the PC has been dropped my wireless internet has been quite unreliable, I'm not sure if this is related. It still works when used with an ethernet cable.
I've tidied up the text for you. We don't have an edit facility on the forum.
Thanks, could you take "has" out of the title also..?! Many thanks
This looks like the case fan that has been dislodged ( cheap as chips to buy PCWorld).....I would forget the clips....replace the fan where it was originally & look to see if there are holes in the case that correspond to at least two if not all four corner holes on the fan.....then use self tapping screws from the outside of the case to secure the fan PS make sure you have the fan the right way round...it needs to suck air out of the case !!!
The link below is to a webpage that clearly shows your heatsink with the fan attached by the clips.
Thanks for your help but this has not become a much bigger problem!
I clipped the fan back to the heatsink as advised, tested that it would work okay by turning the power back, whilst the case was still off and PC on its side. It worked fine but after about 10 seconds the clip facing one of my cards flung off and hit the card right next to the heatsink. There was a spark and the PC shut down immediately and now will not turn back on
The spark came from the card directly next to the heatsink http://i42.tinypic.com/4smz6d.jpg[/IMG] by looking at the PC can you tell me if you know what card that is? I think it's the graphics card as that is where i plug my monitor plugs into the PC...? Is it possible i've damanged more than one component here?
I am no idea which component is broken now and have arranged for the PC to go into repairs. What a nightmare!
Thanks for your help though! Feeling quite gutted now as the PC cost me £800 and i am broke at the moment.
Why the clips are not made of a non-electrical conductive material is beyond me!
Check all the fuses first, including the one in the mains plug.
This thread is now locked and can not be replied to.