//some 3rd party need geo

PC chips M848A mobo

  MIKE 17:12 11 Mar 04
Locked

Hi folks could any one out there give me any advice on changing the speed of my proccesor. I am using a 2.5 + 1.8 AMD Barton xp Athlon have run belarc system analyser against it and it shows the speed to be 1.10 gigahertz,I think it should be 1.8. How do I, and where do I go to change the settings in the BIOS.

  rusty 19:24 11 Mar 04

I an using the same motherboard and CPU.
My Bios is set up as follows, in
Advance Chipset Setup.
Detect CPU Frequency=AUTO
CPU Frequency =166MHz
Auto detect Dram Frequency =ENABLE.

At the opening POST page the CPU size is shown on the top left side.

Rusty

  MIKE 19:41 11 Mar 04

Hi Rusty your a star. I did not have the Auto detect Dram Frequency =ENABLE, changed my settings it now shows as a 1.83GHZ. The manual is no help at all, overall the board is quite good for the price but lets it's self down with not enough info where you want it. Thanks again.

This thread is now locked and can not be replied to.

What is Google Allo? What is Google Duo? Google Allo UK release date rumours and features: Google…

1995-2015: How technology has changed the world in 20 years

These clever designs help visualise a complex intelligence tool

iOS 10 troubleshooting tips: Simple fixes for the most common iOS 10 problems, from network…