The Legend of Zelda Breath of the Wild review: Five hours with Zelda on the Nintendo Switch
Is there a free software that can track when any part of my network is disconnected giving me the day and time it happens. This is not spam.
I have 3 buildings. There is a wireless N router in each. They are all connected together with different ip addresses.
Bldg. 1 starts from modem to router. It is wired to 2 computers and has wireless connecttion to 3rd. Never have problem here.
Bldg. 2 router connects by wire to 2 computers. Rarely have problems here. Cable from bldg. 1 to bldg. 2 is inside pvc conduit.
bldg. 3 router connects by wire to 1 computer and wirelessly to another computer. This is were the problem was. Connection was lost at building 3 a couple of times in 2 days.
I have brand new cat5e indoor cable running from bldg. 2 to bldg. 3
My intentions were to put the indoor cat5e cable inside pvc conduit but have not had a chance yet and the cable was laying on the ground most of the 250 ft. run. Part of the 250 ft. run to the 3rd bldg. was inside underground conduit and got wet. At the 3rd bldg. the cable continues from the 3rd router to the inside of the building wired to 1 computer and wireless to another.
Do you think that the wet cable could have been the problem. There is never more than 100 meters of cable between any router and the endpoint computers.
Also, the reason I put the words "this is not spam" was because when I created this message this website said it was spam, so I put those words there and the notice went away.
Thanks for your patience in reading this. This is obviously not the typical home network situation.
I suspect this will need someone with "hands on" access to the kit in order to be able to sort it out. It sounds as though you're pushing the length of the cable runs very close to their limit and the IP addressing possibly isn't straightforward.
This thread is now locked and can not be replied to.