Please dont use capitals- thats like shouting
very bad manners.
I did take a 500 apart once.about 3 years ago
As i recall two screws deep down at back and similar at front under the cover.
but careful examination will reveal all.
You could also try
Then look up the make/model.
Just remember these things asre snapped together by low paid slaves in a hot far east land. If they can do it- you can undo it -just take your time.
One last point there is nood to do this to clean the heads. Indeed you will have a hell of as time getting it all back together and then work--- this is experience speaking.
Take the carts out
Find a syringe or sqeezy plastic[refill] bottle .
Asl a length of heavy duty cable conductor with the copper stripped out[6 inches] or a drinking straw.pierce the bottle cap and fit the straw.
Check the fit of the straw over the 'spikes'
that go into the carts.
Now half fill the bottle with distilled water and a dash ol alcohol.
Squeeze the botle back and forth to that you get a pumping action.
Have plenty of to tissue to hand to mop up.
Whilst you are at it. if you have been experiencing inky stripes- the waste ink pads could do with a wash and dry out - anther messy job for a Sunday.
You may also find click here utility useful