NTL with two Pc's ??

  Magik ®© 22:33 01 Jul 05
Locked

hi, I assume that with NTL the PC is connected to the modem with a cable, is it possible to run two PC's with any sort of wireless connection, or can you run 2 PC's from the one modem.

thanks

  mgmcc 23:21 01 Jul 05

To create a wireless network for Internet access and File/Printer sharing, you have essentially two options:


1) Install a Wireless Network Adapter in each PC and create an “Ad Hoc” Wireless Network. This is a network in which the two PCs talk directly with one another, rather than via a Wireless Access Point. “Internet Connection Sharing” is then enabled on the actual Internet connection in the “host” PC and the “client” PC will have Internet access provided the “host” is running and online.


2) The preferred option for connecting more than computer is to use a broadband Router and, with ADSL, this should be a combined “Router/ADSL Modem”. Cable broadband uses as "stand-alone" router as the supplied modem supports an ethernet connection. This is an ”Infrastructure” wireless network because the connected PCs communicate via the router’s Wireless Access Point. Again, a wireless adapter is installed in any PC that needs to connect wirelessly, but often the main PC is close enough to the router for it to use a “wired” connection with only the remote PC connecting wirelessly.


With “Internet Connection Sharing” under option (1), when you enable this on the Internet connection, it automatically configures the Local Area Connection with the IP address 192.168.0.1 and subnet mask 255.255.255.0. However, as you will be using a WiFi adapter, you want this address to be allocated to it, rather than a “wired” Ethernet adapter if you have one fitted, so the Local Area Connection should be disabled before setting up “Internet Connection Sharing”. Also, if you run the Zone Alarm firewall in your “host” PC, the Internet Zone Security level must be reduced from High to Medium or “ICS” traffic will be blocked.


With a router, as in option (2), it is the router which connects directly to the ISP and not one of the connected PCs. The router in turn allocates the IP addresses to the PCs, using one of the address ranges reserved for Local Area Networks, usually 192.168.xxx.xxx


Either of these options will additionally allow you to run File and/or Printer Sharing wirelessly across the network.


If you are running software firewalls, the IP addresses of the networked PCs must be put into its "trusted" area to allow them to communicate with one another.

  Magik ®© 23:25 01 Jul 05

thanks for all that, i will print it off..

This thread is now locked and can not be replied to.

Nintendo Switch review: Hands-on with the intuitive modular console and its disappointing games…

1995-2015: How technology has changed the world in 20 years

Prehistoric Britain is laid out in these Royal Mail stamp illustrations

Best running headphones | Best sport & fitness headphones: 4 brilliant pairs of wireless…