no powerdown plus startup problem

  Whitewater 11:23 04 May 05
Locked

Re emachines 380 imperial G mobo, Celeron 2.2 processor, XPHome with SP2.
A friends XP machine shut down and powered off as normal but next morning refused to start - no new installs and was running cleanly prior to this.
Power is getting to the board as the CPU fan functions ok but there is absolutely no Hdd activity (no noise) nor lights to front panel. Also, the only way to apply power is to plug in the power cord at the rear of the machine - the front switch is dead.

I swapped to a new PSU and removed all PCI cards.No change.I then reset the CMOS jumper to clear the base settings and plugged in power and hey presto it booted to a CMOS checksum warning. I reset the time and date settings in BIOS setups and the machine booted ok.
There is no APM option in Bios, the machine is ACPI compliant and POWER OPTIONs Advanced is set to shut down. hibernate box is unchecked and standby and HDD set to never. There is also no APM/NT Legacy powernode option within hidden files in the Dev Manager hidden files entries.

Having logged off user(admin) and hit Start/Shutdown, XP shuts down as normal as far as I can tell (monitor advises no signal) but power stays on with the HDD LED continuously on. The front panel power switch will not switch off power - I have to remove the power cord to power down.
I then need to short the CMOS to start up again.

Apologies for the length of this post; any ideas folks? Is the Mobo trashed perhaps?

  Fruit Bat /\0/\ 18:14 04 May 05

bump

  woodchip 18:40 04 May 05

Faulty Mobo

This thread is now locked and can not be replied to.

Best phone camera 2016/2017: Galaxy S7 vs iPhone 7 vs Google Pixel vs HTC 10 Evo vs OnePlus 3T vs…

1995-2015: How technology has changed the world in 20 years

The Pantone Colour of the Year 2017 is Green

Super Mario Run preview | Hands-on first impressions of Super Mario Run: Mario's iPhone & iPad…