No power to monitor, keyboard

  shogun100 11:08 25 Nov 08
Locked

Went to turn on my PC this morning the tower(fans etc) all seem to be working fine but there is no power going to the monitor or keyboard (although if i unplug cable for kb and put back in the lights do flash) i have tried a different PSU but still same problem. Any other ideas on what could be wrong would be appreciated.

  Fruit Bat /\0/\ 11:16 25 Nov 08

Sounds like its going straight into hibernation, try tapping F8 during boot up and select safe mode from the list if you can see one.

  shogun100 11:18 25 Nov 08

no joy with that already tried it

  MAJ 11:20 25 Nov 08

It nothing is happening with the monitor, no signs of life at all, check the fuse or move it's plug to a different power socket. Are you using a surge protector?

  shogun100 12:01 25 Nov 08

sorry my mistake it's a no signal problem

  Switcher 12:44 25 Nov 08

How do you know that the keyboard is not working since the screen is not receiving a signal. Check that the video card is securely seated and check all internal connections at the same time.

  shogun100 13:35 25 Nov 08

have removed and reseated components, i know the keyboard is not working as the lights flash when power is initially on then go out.

  Fruit Bat /\0/\ 14:05 25 Nov 08

Will it boot from CD?
Do a repair

Repair XP by install over the top of existing system

1. Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order.

2. When you see the "Welcome To Setup" screen, you will see This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

3. Press Enter to start the Windows Setup.

To setup Windows XP now and Repair Install , press ENTER.

DO NOT choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console).

4. Accept the License Agreement and Windows will search for existing Windows installations.

5. Select the XP installation you want to repair from the list and press R to start the repair.

6. Setup will copy the necessary files to the hard drive and reboot.

Do not press any key to boot from CD when the message appears.

Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.

Repair XP
click here

  shogun100 09:28 26 Nov 08

I took out video card cleaned fan and seems to work fine since. thanks for reply's though

This thread is now locked and can not be replied to.

Surface Pro (2017) vs Surface Pro 4

20 groundbreaking 3D animation techniques

How to mine Bitcoin on Mac