no bleep

  wis 14:38 29 Apr 08
Locked

finnished new build all gone well,
the only strange thing no system bleep or bleeps
changed spk1 lead round still no joy,
gone in bios cmos, gone though all options to
try to sus out,but dont want to enable things
i dont fully understand,

any help would be good

  wis 14:52 29 Apr 08

sorry m board is geforce6100pm-m2

  Gongoozler 17:02 29 Apr 08

No beeps - but does it work?

  Zeppelyn 17:27 29 Apr 08

Usually something simple like not attached properly, missed a pin etc, is it a new case or did you reuse old?

  wis 19:07 29 Apr 08

new build all new, swopped plug round made sure
properly seated,system works great well pleased
but this realy niggles me only problem with it

  Gongoozler 19:07 29 Apr 08

I notice that the speaker header has Vcc, Gnd and signal. I think the speaker should be connected between Vcc and Signal. The polarity isn't important.

  wis 19:43 29 Apr 08

yes my friend
user guide infront of me now i quote
pin 1 vcc
pin 2 key
pin 3 gnd
pin 4 signal

m board spki has 3 pins
spk1 lead from tower 2 pins at both ends
trying to give as much tech as poss but help

  Gongoozler 20:11 29 Apr 08

Hi wis. You might well have to apply a biy of surgery to the connector so that you can connect to Vcc and signal - pins 3 and 4. The configuration of the circuit that drives the speaker is simply a switch that grounds the speaker at the beep frequency, so the other end of the speaker needs to connect to Vcc.

  Gongoozler 20:28 29 Apr 08

Must concentrate better. I meant to say a bit of surgery to the connector so you can connect to pins 1 and 4 of the header.

  wis 20:33 29 Apr 08

yes i see where your comming from
but pins 3/4 are gnd signal as guide
hence why im flustated my prev ,connecter is
wired on end pins vcc signal get it wrong turn
it round, will work but no, as you say no prob
to split this connecter,you think go pin 3/4
will be good ill try

please confirm

  wis 20:59 29 Apr 08

i tink my last post came in just after ,forget
pin 3/4, plug is ready to go pins 1/4 but no joy

This thread is now locked and can not be replied to.

Samsung Galaxy Book review: Hands-on with Samsung’s high-end hybrid

1995-2015: How technology has changed the world in 20 years

This is probably one of the best bank ads we’ve seen

Apple Watch 2 vs Huawei Watch 2 comparison review: watch out for 4G smartwatches Apple