Intel Coffee Lake 8th-gen Core processors release date rumours
Using wireless networking with BT voyager 2000 I have networked my desktop PC to my laptop PC. All is fine and I can use files from my desktop PC from my laptop.
But I cannot see laptop files from my Desktop PC. A friend says it's because the desktop is the Host while the laptop is the client, but surely I should be able to see files from either direction?.
Can anyone advise, please?
are you using zone alarm firewall?
if so on the main screen (zone alarm) click the firewall tab on the left then main tab at the top.
click advanced (bottom right)
then choose "this computer is an ICS/NAT gateway"
your ip address should be shown in the box under this selection, make sure it is your primary ip. that should then open up the network through your firewall.
cant help with any other firewalls as i have only used zone alarm.
Indeed I'm using Zone Alarm Pro.
Should the IP address be the same on each PC when entering it into Zone Alarm?
I have ping tested each one and get a return of 192.168.1.3 for notebook and 192.168.1.2 for Desktop PC
However in Zone Alarm it gives 192.168.1.1 on both computers.
I'm offered options of "this computer is an ICS/NAT gateway" and "this computer is a client of an ICS/NAT gateway using Zone Alarm Pro". So not sure which one to tick.
Just to prove a point to myself, I stopped Zone Alarm Pro on both PC's and disabled the firewall on my BT Voyager 2000 Router but still could only see one way ...
I have the Voyager 2000 wired to my Desktop via J145 network cable and am using the BT wireless PC card on my Notebook PC to send receive to the Voyager 2000.
BT also supplied a USB wireless unit for my desktop but I don't seem to need this, it makes no difference whether it's plugged in or not. Overkill on their part I think.
Hope someone can still help.
Do you kave a shared folder on the laptop?
IE., have you enabled file sharing on the laptop...
Yes, I have enabled file sharing.
When I look in 'Map network drive' both notebook and Desktop appear on the laptop screen.
When I do the same thing on my desktop the network name appears with a plus sign next to it, but on clicking on it, the plus sign just disappears leaving just the name of the network.
There is a better fix for this i know, but i don't have the time to check it, im on my Linux Computer at the min.
If you don't crack it in the meantime ill get back with a more elegant solution!!! Sure somebody else will help in the meantime....
Till then, put the files you want to see in the folder on the laptop where the desktop files are viewed, say you have a folder on the desktop, called desktop files, and this folder can be viewed on the laptop, then put the laptop files in the folder desktop files, and you should be able to view them on the desktop....
Elegant no, but it does work, i did it and no probs....
Did you use the XP, network assistant and the floppy it creates ???
Keep posting, you will sort it handy in the end
Kitz E Kat
Unfortunately when I try to move files from my notebook PC into the Desktop folder that I CAN see it won't allow it...says I don't have permission..possibly.
I then made sure that I selected 'allow other users to alter files and folders' on the Desktop PC but I still couldn't copy files from my notebook to the Desktop folder.
On seeing the desktop folder displayed on my laptop, I can copy FROM it, no problem, but not TO it.
I can see anything on the Desktop PC from my Laptop but nothing on the Laptop from my Desktop.
Thanks for your help. This seems to have foxed a number of people but, as you say, there must be a way around it.
If you tried the network assistant there is a good chance that it has enabled DHCP...
As your friend says you have a client and a host.....
Try this, you can undo these changes by runing the network assistant again....
Start>Control Panel>Network Connections(i assume you have classic view!)>Local Area Network> you will see a window with a line Internet Protocol(TCP/IP), click on this,Check the Use the following IP address, give it an address, like .... 169.254.225.1,, then click on the Subnet Mask it should enter a number like 188.8.131.52, you should not have to type a number in this box, Click on OK do the same on the other machine , except give it an address 169.254.225.2, the subnet mask should be the same as above, both computers should have the same network name, IE, WORKGROUP,
This will create a peer to peer type network, and you should be able to share OK....
Let me know how you get on,
hope this helps
Ok, tried that but I just lost my Internet connection after altering the settings so I'm reverting back to the wizard.
I got my Internet connection back once I set it to "automatically detect settings"
This thread is now locked and can not be replied to.