Networking my Sony Blu Ray

  snowy30 01:03 27 May 10
Locked

Hi, it's been a fair while since I posted on here last. Could someone give me some advice on home networking, please? Would I be better off with a 'Switch' or a 'Hub'? I want to connect my new Sony Blu-Ray 370 player to my broadband connection, the player is downstairs and the modem is upstairs so I would be needing a wireless connections, but which one would you recommend? The transfer rate needs to be at least 100Mbps from what I can make out from the manual. I would be needing an adapter too.

Thanks

  mgmcc 08:02 27 May 10

A network "switch" should always be used in preference to a "hub" but these are for *WIRED* ethernet networking.

If you are going to connect the player to the internet "wirelessly", and require a data transfer speed of at least 100Mbps, then you need to use an 802.11n Router and an 802.11n Wireless Network Adapter in the player both of which support a 300Mbps connection. Some 802.11n hardware is only 150Mbps which, in practice, may not deliver 100Mbps. You might have to use a dedicated Sony USB adapter in the player.

Having said that, I cannot see why the network needs to be "at least 100Mbps" when most people's internet connection is unlikely to be even 10Mbps.

  snowy30 14:15 27 May 10

Well, I was going by the LAN (100) for wired networking. I then assume it needs a 100Mbps connection for both wired and wireless connection.

This thread is now locked and can not be replied to.

LG G6 review: Hands-on with LG’s bold, big-screen shot at perfection

1995-2015: How technology has changed the world in 20 years

How the 2017 Oscar-winning VFX of The Jungle Book were created

The 22 best Safari extensions | Best Safari plugins: Improve Apple's Safari web browser with these…