Huawei P10 review
Recently I've been having my internet browsing interrupted frequently. A small message "Local Area Connection ... A network cable is unplugged" pops up at the bottom of my screen, and the two normally green internet arrows go to flashing yellow. Usually after a few moments the arrows go back to green, and I'm able to reconnect to the internet.
I'm with AOL using a BT Voyager 100 modem connected to a normal BT landline. I have no network of any kind on my PC.
Naturally, I've checked all cable connections because that's what the message suggests. No problems that I can see there, so what else could be causing this problem, please? Can it be software related (been running for 5+ years without an issue), a physical problem with my telephone line or the exchange, or a much deeper www problem?
“A network cable is unplugged”
If you disconnect the Ethernet cable from the LAN port on the computer, you will get the
message "Local Area Connection network cable is unplugged"
Any of the following problems can cause the message to appear
The modem is turn off and back on
The phone line signal to noise level is to high so the signal is disconnected from the
The Ethernet cable is faulty
The modem or Lan port is not making proper connection with the cable
The Lan card driver needs to be installed
Try the following
Disconnect the Ethernet cable at both ends and reconnect
Replace the Ethernet cable
Reinstall the Lan card driver
Replace the modem if you have a spare unit
Get the phone line check
Thanks, ambra4. The message I get is exactly as I've quoted it -- the first bit is in bold as the title of the message bubble, and the second bit is the message within the bubble.
I have no LAN, so does that mean I have (or need) no LAN card or driver? Also, what is the Ethernet cable -- is it the cable from my USB socket to my modem? If so, I've tried unplugging/plugging that, and I've got no spare of it or the modem to try a replacement.
Ethernet is the cable from computer to modem/router. The other one is an ordinary phone cable.
Whoops, sorry - misread the question. Muppet!
Your system is picking up a network card you do not use.
1) Open Control Panel
2) Open Device Manager
3) Scroll down until you find the entry for your LAN connection (the one you do not use)
4) Right Click and choose "Disable"
This should stop the error message coming back, as you do not use a lan connection, you do not need the device enabled....It's part of your motherboard, and you can reverse the process (enable) if you ever need to use a LAN connection.
crosstrainer, I've gone into Device Manager and it shows 3 items under Network adapters:-
1394 Net Adapter
GlobeSpan USB ADSL LAN Modem
Which of these do I not need? I've always assumed that the GlobeSpan modem is in fact my BT Voyager modem.
This raises another question, whenever I connect to the internet the AOL message says (and has done for some time) that I'm connecting via TCP/IP ... protocol. It used to connect via ADSL -- does it matter that my modem is an ADSL one still?
If you are using ADSL for your Internet, proceed as follows:
1) Open control Panel
2) Right click Internet icon
3) Choose properties
4) Click the connections tab
5) Click the radio button marked "Never Dial A connection"
6) Click Apply.
If you are not using ADSL for your Internet connection, then disable the ADSL adapter in device manager.
Try these one at a time. and reverse the process if you lose connection, then post back with results.
OK, "Never Dial A Connection" was already checked.
I don't know if I am using ADSL or not: I know I used to be, because the AOL message used to say "Connecting via DSL/ADSL..." or something like that when it was connecting to the internet. For perhaps the past year or so the message has been "Connecting via TCP/IP ..." instead. None of my hardware has changed in that time, and there's only one modem shown in my Network Adapters list (GlobeSpan USB ADSL LAN Modem), so whatever I guess I must still be using ADSL, mustn't I?
I had a similar problem - bought a new ethenet cable etc. Solved in the end by plugging the ethernet cable into a different female connection on my modem / router! I guess there was a loose connection in one of the 5 slots.
This thread is now locked and can not be replied to.