My Athlon 1700+ is only reading at 1100hz

  Jonathan-295313 19:33 19 Feb 04
Locked

I've just put a GA-7N400-L gigabyte m/b in my pc. Whin I switch on the black and white writing recognizes the processor as a athlon 1100 with the message CPUID 066> after it. Gigabytes tech. support says my PSU at 300w is not enough, and I need a 450w or 550w supply. Can this be correct?
I am running Win 98 with
2 x Hard drives. 20GB primary and a 6GB on a removable caddy.
128mb DDR Geforce 3 TI200 G/card.
CD drive.
CD/RW drive.
Front panel hub.
2 x case fans.

  Rayuk 19:34 19 Feb 04

Just go into the bios and alter the cpu fsb to 133 you should be ok with the psu

  Jonathan-295313 19:49 19 Feb 04

I tried that. I did have to do it more than once though, to make it 'stick'. sometimes it dosen't mention the speed at all, even in the Microsoft System Information, just that I have an Authentic AMD

  Rayuk 19:50 19 Feb 04

Is there a jumper on the motherboard to change from 100 to 133?

  Jonathan-295313 19:56 19 Feb 04

No, that I can see, and there's no mention of one in the manual of one. I did spend some time looking as there was on my last m/b.

  Rayuk 19:56 19 Feb 04

See page 18 of the manual

  Jonathan-295313 20:05 19 Feb 04

Is that about the DDR introduction? I am running 512mb (2 x 256)of PC2100 DDR, Although not the same brand. I bought the second module at the same time as the m/b. I am using slots 1 and 3. I changed the m/b because of similar problems to, 'Blank monitor problem' and 'PC randomly doesn't start'

  Rayuk 17:13 20 Feb 04

There is a jumper on the mobo that is set to 100 as default you need to swap this over for auto its between the agp slot and the northbridge fan

  Jonathan-295313 17:52 20 Feb 04

Nice one ........ I think. I've had a look, and there is a switch there. Looking in the manual (p14) it does say 'set system jumper' I was looking for a little plastic thing across some pins......dohh. I'm going to try it now.

Thank you for your perseverance.

  Jonathan-295313 18:12 20 Feb 04

Genius.

  Jonathan-295313 18:15 20 Feb 04

Do you know if It will have damaged anything or is it a case of wait and see?

This thread is now locked and can not be replied to.

What is Amazon Go and will it come to the UK? The store without checkouts or queues

1995-2015: How technology has changed the world in 20 years

Why ecommerce hasn't taken off on social media

New MacBook Pro 2016 review | MacBook Pro with Touch Bar review: Apple's expensive and powerful…