loop at start up

  beb 21:43 13 Dec 10
Locked

was playing world of warcraft then pc just turned off and went to restart , I get the start screen with graphics info as normal then the acer logo as again as normal , then a flashing cursor on left top of screen , then goes back to graphics info , then acer logo and coutinues in this loop , windows will not load , running windows vista and have tryed pressing F8 to get into safe mode but cant get there , any help much appriciated , using daughters lap top at the mo .

  Fruit Bat /\0/\ 22:15 13 Dec 10

Ultimate editions only)
* Windows Memory Diagnostic Tool - This checks your computer's memory hardware for errors
* Command Prompt - This opens a Command Window

With the Complete PC Restore Option you must have made a backup of your system, either on your hard drive or on a set of DVDs, in order to use this option. If you don't have a backup then don't use this option

How you access the repair options will depend upon whether you have a Windows Vista installation disk or whether your operating system came pre-installed by your PC manufacturer.

Pre-Installed Options
NOTE

If no repair options are available your PC manufacturer may have replaced the tools or customised them. Check your Computer Manual before proceeding.

1/ Start your PC

2/ If your PC has one operating system Press and Hold the F8 (F5) key as your PC starts. If the Windows Logo appear you will need to start again

3/ If you have a dual boot system a Boot option menu will appear. Highlight the Vista operating system and Press the F8 key

4/ In both cases, if all has gone well, an Advanced options screen will now appear

5/ Highlight the repair Your Computer option and Press Enter

6/ Select a keyboard layout, and then Click the Next button

7/ Next select your user Name and Enter your Password, then Click OK

8/ The recovery options should now appear

Windows Installation Disk
NOTE

1/ make sure your PC can boot directly from the Vista DVD. Obviously, most modern PCs can. With older machines you may need to check the PC's BIOS

2/ Start the PC

3/ Immediately insert the Windows Vista DVD into the DVD drive

4/ A Black screen will appear with the words 'Press any key to boot from CD or DVD'

5/ Press Any key to start the booting process

6/ A new screen will now appear with a progress bar. The legend say's 'Windows is loading files'

7/ After a few minutes the Microsoft copyright window ill appear and another small progress bar will be visible

8/ You will next see a Blue curtained screen

9/ After a short while the Language option screen will appear

10/ Select your language and keyboard language and the Click the Next button

11/ At the bottom left of the next screen - the Install screen, Click on the Repair Your Computer option

12/ The System recovery options will now search for your Windows Vista installation

13/ Once the Vista installation has been located, Highlight it and then Click the Next button

14/ You are now presented with the set of recovery options

15/ Click on the Option you require and follow the onscreen prompts

  beb 22:17 26 Dec 10

must have been hard drive fault , got a second hand one from an old pc , up and running now just got to download 25gb of world of warcraft , tut !!

This thread is now locked and can not be replied to.

How to get Windows 10 for free | How to install Windows 10: There is still a way to avoid paying…

1995-2015: How technology has changed the world in 20 years

Alex Chinneck’s giant ice cube Christmas tree at Kings Cross

Apple rumours & predictions 2017: The iPhone 8, new iPads, and everything else you should expect fr7…