How to get Windows 10 for free | How to install Windows 10: There is still a way to avoid paying…
ANY GENIUS OUT THERE UNDERSTANDS THIS...PLEASE HELP...
The blue stop error comes after windows setup has loaded files and comes on soon after setup is loading windows. It reads as follows: A problem has been detected & windows has been shut down to avoid damage to the pc. The problem seems to be caused by the following file: Setupdd.sys PAGE_FAULT_IN_NONPAGED_AREA Tech info:***STOP 0x00000050(0xC368E131,0x00000000,0xF99D5417,0x00000000) ***setupdd.sys-Address F99D5417 base at F999E000, Datestamp 3b7d8507.
that didn't quite show properly did it?
type this in to your address bar:
h t t p://support.microsoft.com/default.aspx?scid=kb;en-us;315335&Product=winxp
(without the spaces between letters in http)
I've gone on 2 the link u gave but unfortunately it says it's unavailable at the mo....i had a suggestion yesterday from someone to run a diagnostic memory test after downloading it from the web....but i can't get the pc to run the test....any idea?
well here it is in it's entirety... but excuse the formatting as it's simply a cut and paste job...
"STOP 0x0000008e" Error Message During Windows XP Setup
This article was previously published under Q315335
When you install Microsoft Windows XP, you may receive a STOP error message similar to one of the following during Setup:
STOP 0x00000050 PAGE_FAULT_IN_NON_PAGED_AREA
Additionally, if you troubleshoot by removing all unnecessary hardware devices that are installed on the computer, and then running Setup, you may receive an error message similar to the following:
Setup cannot copy the file Setupdd.sys.
This behavior can occur if one of the following conditions is true:
One or more of the random access memory (RAM) modules that are installed on your computer are faulty.
The RAM configuration is incompatible with Windows XP.
To troubleshoot and resolve this behavior, follow these steps:
Remove some of the memory modules that are installed on the computer. Leave at least the amount of RAM required for the computer to start and run Windows XP.
The recommended amount of RAM to run Windows XP is 128 megabytes (MB). The minimum is 64 MB and the maximum is 4 gigabytes.
For example, if two 256-MB memory modules are installed on your computer, remove one of the memory modules.
Restart the computer, and then run Setup.
If you again receive the error message that is described in the "Symptoms" section of this article, proceed to step 4.
Remove a different memory module, or install the RAM in a different memory slot.
Restart your computer, and then rerun Setup.
You may need to restart your computer several times in order to identify the specific memory modules that are not working correctly.
or same as your other link you posted
Did as u suggested:
No results were found for your search: click here;en-us;315335&Product= ...
gotcha....am trying it now and keep u posted in a while-thanxs
although the memory was not faulty, changing it with another seem to make it work??!!
This thread is now locked and can not be replied to.