laptop boot up problem

  king joe 17:23 10 Jan 09
Locked

I have a Siemens laptop running vista home basic.When I switch on,I only get up to the password screen,fill it in and then a blank blue screen with only the cursor arrow comes up.Any suggestions?

  Fruit Bat /\0/\ 17:35 10 Jan 09

you need to look at Windows Vista's Repair Your Computer options.

How you access the repair options will depend upon whether you have a Windows Vista installation disk or whether your operating system came pre-installed by your PC manufacturer.
Windows Installation Disk
NOTE

With the Complete PC Restore Option you must have made a backup of your system, either on your hard drive or on a set of DVDs, in order to use this option. If you don't have a backup then don't use this option

1/ make sure your PC can boot directly from the Vista DVD. Obviously, most modern PCs can. With older machines you may need to check the PC's BIOS

2/ Start the PC

3/ Immediately insert the Windows Vista DVD into the DVD drive

4/ A Black screen will appear with the words 'Press any key to boot from CD or DVD'

5/ Press Any key to start the booting process

6/ A new screen will now appear with a progress bar. The legend say's 'Windows is loading files'

7/ After a few minutes the Microsoft copyright window ill appear and another small progress bar will be visible

8/ You will next see a Blue curtained screen

9/ After a short while the Language option screen will appear

10/ Select your language and keyboard language and the Click the Next button

11/ At the bottom left of the next screen - the Install screen, Click on the Repair Your Computer option

12/ The System recovery options will now search for your Windows Vista installation

13/ Once the Vista installation has been located, Highlight it and then Click the Next button

14/ You are now presented with the following set of recovery options

* Startup repair - This automatically fixes problems that are preventing Windows from starting
* System Restore - This will Restore Windows to an earlier point in time
* Windows Complete PC Restore - This will completely restore your entire PC - programs, system settings and files - from a back up that you have previously created (Available in Windows Vista Business, Enterprise and Ultimate editions only)
* Windows Memory Diagnostic Tool - This checks your computer's memory hardware for errors
* Command Prompt - This opens a Command Window

15/ Click on the Option you require and follow the onscreen prompts

Pre-Installed Options
NOTE

If no repair options are available your PC manufacturer may have replaced the tools or customised them. Check your Computer Manual before proceeding.

1/ Start your PC

2/ If your PC has one operating system Press and Hold the F8 key as your PC starts. If the Windows Logo appear you will need to start again

3/ If you have a dual boot system a Boot option menu will appear. Highlight the Vista operating system and Press the F8 key

4/ In both cases, if all has gone well, an Advanced options screen will now appear

5/ Highlight the repair Your Computer option and Press Enter

6/ Select a keyboard layout, and then Click the Next button

7/ Next select your user Name and Enter your Password, then Click OK

8/ The recovery options should now appear

This thread is now locked and can not be replied to.

AMD Ryzen release date, specifications and features: Three CPUs from the Ryzen 7 range now…

1995-2015: How technology has changed the world in 20 years

Glassworks Barcelona shows how it captured the artistic imagination of Conor in A Monster Calls

Best iPhone games 2017 | Best iPad games 2017: 162 fantastic iOS games that you need to play right…