just an annoying printer bug

  rosyred 23:38 24 Sep 03
Locked

have an hp deskjet 930c and everytime I put it on it takes a piece of paper halfway thro and then the paperjam light comes on - not the end of the world but annoying

  Djohn 00:04 25 Sep 03

click here I've had a look through the help files here, but can't pinpoint your problem. You could try removing the driver and re-installing to see if that will cure. If not, then an e-mail, or phone call to HP should solve the problem for you. j.

  Bodi 09:49 25 Sep 03

and would just add that cleaning the "rollers" and printer in general with a damp cloth might help too. Surprising how much ink accumilates underneath the cartridge rail.

Do you get the same problem if the printer is left on?

Bodi

  rosyred 20:57 26 Sep 03

Thanks for your comments Have already reinstalled the driver and yes it does happen if i leave it on when I boot my pc

  wee eddie 22:26 26 Sep 03

before you turn off your PC.

Turn it on again after you have booted your PC.

  -pops- 07:03 27 Sep 03

You might want to consider only switching your printer on when you want to use it.

Many printers go through a priming routine at start up - this uses ink. If you are not going to be using the printer at that bootup, that is ink wasted. May not be much per switch-on but over time, it can be significant.

  wee eddie 10:41 27 Sep 03

Both my Canons will run a blank page if the PC is booted while their still turned on.

  rosyred 19:38 30 Sep 03

Have been away and have just read your responses and thanks for all the help. its something that has just happened recently whatever i have on or not or whatever is switched on first or last, the only good side is that the page is blank, the down side is that it sticks half way thro the printer and I have to do a 'remove paper jam' ........just have to live with it
thanks again

  john-232317 21:01 30 Sep 03

I have an epson that threw a wobbly for no reason, i borrowed another cable and put it on and solved it...?

Not sure why but no prob since.

  rosyred 00:31 01 Oct 03

thanks 4 yr help all noted and tried

  DieSse 08:58 01 Oct 03

My HP 940 did odd things at switch, when I first used it via it's parallel port. Since changing to use the USB connection, all has been sweetness and light.

This thread is now locked and can not be replied to.

LG G6 review: Hands-on with LG’s bold, big-screen shot at perfection

1995-2015: How technology has changed the world in 20 years

How the painting-like animated sequences in A Monster Calls were created by Glassworks Barcelona

The 22 best Safari extensions | Best Safari plugins: Improve Apple's Safari web browser with these…