If your printer or scanner makes loud noise......

  Diemmess 11:18 AM 09 Jul 11
Locked
Answered

Just from memory and hoping it might help someone---- An appalling noise when least expected. Out of the blue comes a br.a.a.a..a.ap like the thing was losing teeth from a cog somewhere.

About 15 years ago. This was first heard on a nearly new Epson inkjet. I phoned and an Epson man called, wiped the shiny rail (the track of the print head) and smeared a trace of thin oil on the same rail. Job done!

It seems that some go dry and the print head will not slide freely as it should. A stepper motor does its best but stalls and makes this horrifying noise.

Yesterday I wanted to scan a document with an Epson Perfection. The change from quiet order to absolute panic when the same destructive barp shook me rigid.

Fortunately I remembered long ago and the cause/cure were the same. I used a narrow strip of cloth damped with a silicone/ptfe lubricant, everything is back to normal.

What made this different was that the rail is inside the scanner which had to be opened first. In short, remove two small self-tap screws at ends of the hinge on the base of the unit. This will allow thin screwdrivers to prize it open from this side until plastic lugs let go and the unit is open. None broke. It is a risk but with patience and no small bits to fall out, what have you to lose.

  wiz-king 14:48 PM 09 Jul 11
Answer

Have had that noise several times with the dot matrix printers we used to use for invoice printing. A quick wipe of the slider bar with solvent and then with the proverbial oily rag - job done for another few months.

Advertisement

This thread is now locked and can not be replied to.

New Moto G 2015 confirmed: Motorola Moto G UK release date, price and specification details - New…

Why Vodafone’s frequency choice should interest you: The benefits of 800MHz

Digital visionaries lined up for dConstruct

Apple Pay UK launch guide and participating UK banks: HSBC, First Direct finally support Apple Pay