How to use ethernet cabling built in to the house?

  fatpercy 13:03 PM 25 Apr 11
Locked
Answered

The wif-fi signal in our house is terrible so we've had ethernet cabling put in to the walls as part of a recent building project. So with great excitement i took the (dell) laptop into the kitchen and plugged the computer in with an ethernet cable to the wall socket. The laptop told me i had fair wi-fi (ironically better than usual!) but no network cable was detected. The router (linksys) is in the study plugged into the broadband socket. Do I have to move the whole router/power etc and plug it into the ethernet socket in the kitchen? Losing the will to live as what's the point of having the ethernet cabling hardwired into the house if you have to move the router each time from room to room? Also if that really is the case does each room need a separate router and if so how do they speak to each other?

  c4rm0 13:20 PM 25 Apr 11
Answer

are the Sockets patched in ?

Correct way to have got this setup would to have a patch panel or a switch and then each socket around the house would be patched into the patch panel / switch and then the router/Modem connected to the switch to provide internet access

  fatpercy 13:35 PM 25 Apr 11

Thanks so much for replying - the guy who installed it did our electrics and was hopeless - at least now i know what to ask!

  Yokel 13:55 PM 25 Apr 11

Ideally the ethernet socket in each room would be connected to a central point perhaps alongside the BT master socket with the router connected directly to the master socket. Then each room can be patched to the router/modem as required, a patch panel is a tidy method. If the master socket has an ADSL splitter/filter faceplate then no other filters are required.

I have this arrangement (with ten wall points) currently used for two PCs, network disk and TV so each has access to the other and permanent simultaneous internet. The cabling was built in to the house from new so there are mains sockets to hand alongside the master socket. Fast, reliable and secure. Search on 'structured wiring', 'home network' etc.

Tom

  maggotdrowner 14:03 PM 25 Apr 11

It could be that the central switch is in place but power not switched on. You should have been asked where you wanted it siting which in a domestic situation is usually out of sight like in the loft or under stairs in cupboard. You need to know exactly what was installed to understand where any problem could be.

  madmands78 21:48 PM 25 Apr 11

I went for the totally different approach and used the powerline adapter option with a switch. Excellent connection all the time and never having to worry about the cables in the wall. You pug one with ethernet cable into the hub and then have one in my living room with a switch that connects my TV, BlueRay, Wii and PC leaving me an extra port for using whaen I need. I also have a plug in my room and my daughters room. No need for extra extention cables as you can get the 1's that plug into the wall then you can plug your surge protector in to this.

  fatpercy 21:51 PM 26 Apr 11

I'm afraid I wasn't asked about any switch - I have a sinking feeling that the cabling's been put in the attic and the kitchen and meets in the airing cupboard but isn't connected to the main BT socket at all. So if I did ask for a switch I'd need to get more cabling put in through finished walls etc which I'm not keen to do. Should the ether net sockets work even if this is the case but I do move the router around?

I'm not really clear what the powerline adapter option is - is this something I buy per socket or is it a system? So near and yet so far....

thanks again

Advertisement

This thread is now locked and can not be replied to.

How to watch iPhone 6s, iPhone 6s Plus launch live: What to expect from Apple's 9 September 2015…

1995-2015: How technology has changed the world in 20 years

Swedish schoolkids use Minecraft to redesign Stockholm city centre

Apple's special event invitations decoded: A look back at 13 of Apple's most cryptic invites