how do you

  mickylove 20:13 21 Dec 05

hi i want to make my new sata 200gig the primery drive but can not see wear i put the jumpers to indicate this,do i need to do this or am i missing somthing

  Pamy 20:28 21 Dec 05

HDD's jumpers are on the back near to the data cable connector pins and the power supply. So, look at your drive and see if there are any jumper pins and usualy there will be a jumper bridge already there for you to move.


  ade.h 20:39 21 Dec 05

AFAIK most SATA drives don't have jumpers. My WDs do but I've no idea why!

  Fruit Bat /\0/\ 20:52 21 Dec 05

Once you have the drive(s) connected you are ready to start installing XP.

Master and Slave
Remeber since it's serial you can only have one device per SATA port/cable so SATA drives don't have jumpers. On the Motherboard SATA1 Port is for the primary device, SATA2 port is for the secondary device etc.

SATA controller driver
Your Motherboard or SATA controller card requires a driver to work properly. If you did not get a Floppy Disk with the SATA driver included with your Motherboard you will have to make one.
The SATA drivers can be located on the installation CD that came with your Motherboard or preferably, download the latest SATA controller drivers from the manufacturers site. Once you have located the drivers copy them to a formatted floppy disk.
Make sure they are in the root directory i.e. not contained within any folders.

BIOS settings
When you turn on the PC hit the Delete key when prompted and you will enter the BIOS (Basic Input Output System). Here you set the first boot device to be the CDROM drive, the option is usually found under the Advanced Options section but this depends on your BIOS and you may have to look around for it. Once you have done this save and exit.

Installing the SATA controller driver
Once you have set the PC to boot from the CD make sure the XP CD is in the CD drive and start the installation as per usual. Within the first minute or so of the installation Windows will prompt you to press F6 to install RAID or SCSI drivers, do this. Windows will continue to install then ask you to locate the driver. now with the floppy disk created earlier in drive A: select the driver and hit Enter.
With the SATA drivers installed you can now continue the Windows installation as usual.

BIOS settings revisited
Once Windows has finished installing you will need to make sure the PC is set to boot from the SATA drive. To do this make the first boot device SATA if the option is available.If not you have two options: HD0 - If there are no IDE HDs present, or SCSI if you do plan on running an IDE HD as a secondary devic

This thread is now locked and can not be replied to.

How to watch Windows Event live stream, live blog | Microsoft event live stream: Watch Microsoft…

1995-2015: How technology has changed the world in 20 years

This amazing app turns your iPad Pro into a Cintiq

iPhone 7 Plus review: A superb big-screen phablet, but the price tag's enormous | iPhone 7 Plus…