Nintendo Switch review: Hands on with the intuitive modular console and its disappointing games…
Like the title says, I want to upgrade my RAM but I'm not sure which variety I would need to buy to do so. I've checked the crucial website however, the make of my computer is not listed there. I'm kind of stuck so if anyone would be so kind as to instruct me how to find out I would be most greatful.
If you download this free programme click here. It will tell you what type of memory you have in your machine now. If you then click on the motherboard tab, it will tell you the make and model of the motherboard.
post the details here, so someone can advise you on what you can use.
Number of CPUs 1
Name Intel Pentium 4
Code Name Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.50GHz
Family / Model / Stepping F 2 7
Extended Family / Model 0 0
Brand ID 9
Core Stepping C1
Technology 0.13 um
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 2489.9 MHz
Clock multiplier x 25.0
Front Side Bus Frequency 99.6 MHz
Bus Speed 398.4 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kuops, 8-way set associative
L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 2489.9 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset
Motherboard manufacturer NEC COMPUTERS INTERNATIONAL
Motherboard model SiS650, 1.0
BIOS vendor American Megatrends Inc.
BIOS revision 2.0Z
BIOS release date 09/08/2002
Chipset SiS 650 rev. 01
Southbridge SiS LPC Bridge rev. 10
Sensor chip Winbond W83697HF
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfer Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing not supported, not enabled
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
Bank Cycle Time (TRC) 10 clocks
Windows version Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
DirectX version 9.0c
Okay, thats the dealio for my whole computer. Right now I'm interested in the memory upgrade.
But, over the summer i'm looking to do some further upgrades. Bigger hard drive, etc. I was hoping someone might be able to tell me how strong a position I am in to do that with my current set up. Many thanks.
Can I ask why you want to upgrade your RAM.
I've been running a P4 2.4MHZ with 512MB RAM for around three years now. I don't play games or do video processing - and it does everything I ask of it.
Have you got a seperate graphics card, or an integrated graphics controller. If it's integrated, a better upgrade may be a graphics card - this will be faster, and free up some RAM from the integrated graphics back to the system.
has brought up some good points and worth thinking about.
back to the memory. Unortunatley cpu-z has not brought up what I had expected. It tells us that you have 512Mb of ddr ram, the speed of the ram should be under the spd tab on cpu-z.
it lists the motherboard as SIS 650, this is the graphics chipset. It says it is a NEC computer, but they are lots of models of these omputers and unless you know the make and model?
Try running the free version of SIW click here. This is a far more intensive programme and hopefully should tell us what you have. Thats if you still wish to check on the ram.
That program has done the trick pretty much I think.
Capacity 512 MBytes
Maximum Capacity 2048 MBytes
Memory Slots 2
Error Correction None
Error Correction Capabilities None
Name Physical Memory Array
Maximum Memory Module Size 1024 MBytes
Device Locator Slot 1
Capacity 256 MBytes
Memory Type DIMM SDRAM
Device Locator Slot 2
Capacity 256 MBytes
Memory Type DIMM SDRAM
I know what type of memory I'm after now.
The type of NEC computer it is is a Legend 201 -
The exact spec is:
Microsoft® Windows® XP Home Edition
Columbia L (GA-8SIML) Ver 1.0 (Legend) µATX motherboard
Intel Pentium 4 2.5 GHz
Aztech CNR 2800-W (C1) modem riser with EEPROM (CNR, secondary)
HDD Maxtor Falcon series
HLDS GCE-8481B 48x/24x CD-RW drive Mistwhite/Grey
HDD Maxtor d540X-4D Romulus Series
DVD 16x/48x Samsung DVD-616T
HDD Seagate U6 series
Leadtek NV17 GeForce 4 MX
GeForce 4MX440 / 4MX440SE (NV17/NV17SE) 64 MB DDR AGP Videocard + TV-out
So, is upgrading the RAM the best way to go,to keep myself ahead of the game anyway? As I don't really want this one dying on me and not really being much good to me in a couple of years. So, am I doing the right thing or is there something else I should be doing?
Again, thank you for all the help guys.
Currently you appear have two RAM slots, with a 256MB module in each - so to upgrade you will need to get, say two 512MB modules and sell of the 256MB ones.
This thread is now locked and can not be replied to.