Host / Serial Bus controllers for deleteion on USB

  Ex plorer 14:04 19 Jan 11
Locked

Hi my canon 40D wont Connect properly to my Laptop so that I can transfer the photos from the camera.

This is the message I get.
Device driver software was not successfully installed
Device driver software was not properly installed.
Currently, this hardware device is not connected to the computer. (Code 45)


I am following this below The exception is its called Universal HOST Controller that pop up after expanding Universal Serial Bus controllers.
Can they be deleted and reload on restart?

1. Click Start, and then click Run.

Note If you are running Windows Vista, click Start, and then use the Start Search box.
2. Type devmgmt.msc, and then click OK. Device Manager opens.
3. Expand Universal Serial Bus controllers.

4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.
6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
7. Check the USB device to see whether it is working.

  northumbria61 14:09 19 Jan 11

YES !

  Ex plorer 14:15 19 Jan 11

northumbria61 Thanks

This thread is now locked and can not be replied to.

Intel Coffee Lake 8th-gen Core processors release date rumours

1995-2015: How technology has changed the world in 20 years

Framestore’s haunting post-WWII title sequence for new BBC series SS-GB

Best iPhone games 2017 | Best iPad games 2017: 162 fantastic iOS games that you need to play right…