Help with HDD and Optical Drives

  Craigmave 12:30 05 Feb 04
Locked

Hello there. I have just had a majour revamp inside my case. Can you please advise me. How is the best way to set up the IDE cables. At the mo i have HDD 1 and HDD 2 on IDE 1. And i also have CDRW and DVD drives on IDE 2 set as master and slave etc. Is this ok or will this cause problems. I used to have a hdd and an optical on IDE 1 and then the same on IDE 2, but i seemed to be having problems with crashes and all sorts really. Hope that you can help. Ceers from Craig.

  Jester2K 12:59 05 Feb 04

Hard drives on IDE 1 and opticals on IDE 2. Fine

  jimv7 13:16 05 Feb 04

As Jester2K has said is fine making sure that the cdrw is set as master on ide2.

  Craigmave 15:18 05 Feb 04

thats great, thanks for your help.

  GuyR 17:29 05 Feb 04

Don't forget the drive at the end of the cable is the master, the second drive is the slave(or you can use cable select) for jumper settings.

This thread is now locked and can not be replied to.

Surface Pro (2017) vs Surface Pro 4

Where HTML5 is headed next

MacBook Pro v Surface Pro 5