hard drive detection on newly built computer

  exumed 19:15 09 Apr 03
Locked

in my new built computer the time had come to instal an o/s,but first, do all the bios stuff.when i got to the ide hdd auto detection all i got was 15 beeps whilst a pop up said detecting hard drive.after the beeps, nowt, in the capacity heading a big fat zero.all my cabling has been checked so could it just be a faulty hdd.your thoughts on the matter would be gatefuuly received.

  flecc 20:39 09 Apr 03

To find out your beep code meaning, visit this site:-


click here

  BlueMeanie 21:08 09 Apr 03

Beg, Steal or borrow another Hard Drive to confirm if the PC can access any hard drives !!

Have you set the jumpers on the drive correctly ?

If you have installed the CD-Rom disconnect this whilst trying the hard disk detection.

  eccomputers 22:33 09 Apr 03

probably a silly question, but are the ide controllers enabled in the bios?
If in doubt, try setting the bios to optimum performance settings as a test, there is usually an option to do this.

Again, silly question, but check the following...
Blue connector on ide cable is in motherboard.
Black connector on hard drive
grey connector on cd if on same cable, if on seperate cable, it must be the black one.

Make sure the power connector is pushed in tight.

This thread is now locked and can not be replied to.

What is Amazon Go and will it come to the UK? The store without checkouts or queues

1995-2015: How technology has changed the world in 20 years

Why ecommerce hasn't taken off on social media

New MacBook Pro 2016 review | MacBook Pro with Touch Bar review: Apple's expensive and powerful…