Graphics card wont install!!!

  lewtra26 19:56 11 Nov 07

I've tried installing a inno 3D card but when i plug monitor cable into it and re-start the pc,the monitor doesn't come on.I've tried entering bios to disable the the on-board graphics controller but it seems to be password protected!!is there another way to get around this?Thanks.

  RobCharles1981 20:05 11 Nov 07

You may need to clear the cmos by removing the CMOS battery from your motherboard for about 15 seconds and then re-try.

  VoG II 20:06 11 Nov 07

Try this click here

  Totally-braindead 20:09 11 Nov 07

I would take out and refit the graphics card, they are very very tight and its very common for people to be certain its right in the slot when its not. You might have to try it a few times.
That is the most likely explanation.

Also make sure if it needs a seperate power connector that it is plugged in.

Regarding going into the BIOS in most PCs you don't need to do that anyway as most automatically detect the presence of a graphics card and disable themselves.

What model is the card?

  lewtra26 20:29 11 Nov 07

Thanks rob,I will try that later.I have taken it out a few times and made sure its seating right,No it hasn't got a seperate supply,So i'll try everything you all suggested see how it goes.Thanks everyone.

  lewtra26 20:48 11 Nov 07

Sorry Total its nothing special was out of my old pc, just sorting a pc out for my son and thought it would improve it a little.Thanks

  lewtra26 18:54 12 Nov 07

HI,for anyone else with the same problem I entered bios(thanks to rob and vog) and disabled the onboard VGA.Bingo.Thanks again all.

This thread is now locked and can not be replied to.

Intel Coffee Lake 8th-gen Core processors release date rumours

1995-2015: How technology has changed the world in 20 years

Framestore’s haunting post-WWII title sequence for new BBC series SS-GB

How to install MacOS Sierra on an older Mac: Get Sierra running on Macs & MacBooks from before 2009