Floppy disc drive failing to operate

  gdr721 16:52 29 Dec 04
Locked

I recently uninstalled SP2 which cause many problems, since I reinstalled, most have been corrected but my floppy disc drive fails to recognise when it has a disc inserted.
Can anyone please advise what could be the cause and/or possible corrective action?

  Fruit Bat /\0/\ 17:54 29 Dec 04

Was the disk written on your PC or another one?

Will it recognise any disk?

If not recognising any disk then:

1. power cable loose 2. data cable loose (check both ends). 3. uninstall then re install floppy disk controller in device manager. 4. Floppy drive us replace it approx £7.

  alnwrd 18:43 29 Dec 04

Also check in the bios to see if it is enabled

  T0SH 19:51 29 Dec 04

The how to fix help you need is here
click here;en-us;812489
Cheers HC

  T0SH 19:55 29 Dec 04

For some reason my last link does not work

click here;en-us;812489

if this one fails search the MS KB site for article No 812489

Cheers HC

  T0SH 19:57 29 Dec 04

It failed again try this one

click here

Cheers HC

  gdr721 09:34 30 Dec 04

Thank you for your advice.I did re type the line that you recommended, although it was already there, but still the pc doesn't recognise when I put a disc into the drive although properties tell me that its there.

  Gongoozler 10:14 30 Dec 04

Hi gdr721, while it's possible that SP2 caused the loss of your floppy drive, I think it's very likely that it's just a coincidence. Check that the flexi- cable is securely fitted, try a new cable, and at under £5 try a new drive click here.

This thread is now locked and can not be replied to.

iPhone 7 review: a range of small updates add up to an excellent phone

1995-2015: How technology has changed the world in 20 years

How New York’s Stylin’ Seniors became a golden social media campaign

23 Apple Watch tips & secret features: Master your Apple Watch, Apple Watch Series 1 or Apple…