error code for acer notebook

  alan in spain 20:00 03 Sep 06
Locked

can anyone help with an error code which appears when my son tries to install Win ME or Win 98 on his acer notebook. the code is as follows
OE : 0028 : FF03B779

I have looked on the acer forums but as yet cant seem to get an answer as to what the solution is

however I put all my faith in the PC Advisor forums so it thought I would see if anyone here can help LOL

regards to all that helped before

Alan

  woodchip 20:10 03 Sep 06

Questions Questions, As the Computer had XP on before?

  SANTOS7 20:12 03 Sep 06

click here
closest i can get, it may help..

  woodchip 20:15 03 Sep 06

As I thought there are files and MBR still on the disc

  jimv7 20:16 03 Sep 06

It is possible that the original os was win 98, and trying to install me can generate these errors for the video/graphics card which is not supported by me.

'Googleing' for your error message seems to point to the above especally related to acer.

  alan in spain 09:59 04 Sep 06

sorry for being a fool and not putting enough info on, The notebook was bought just under 1 year ago and was supplied with XP my son wants to run 98 or ME on the notebook for older applications that cant use xp. this will be on a partition

hope that helps


alan

  Fruit Bat /\0/\ 10:24 04 Sep 06

Drive C: must be FAT32 to be able to install Windows 98 after XP is already installed. The 98/Me installation routine cannot write to an NTFS partition.
You must have a second hard disk or partition formatted for FAT32 in order to be able to install Windows 98/Me, installing 98/Me to the same partition as Windows XP is Not recommended!

Use a Windows 98 Startup disk for this procedure. You should ensure that DEBUG.EXE is on your Startup disk. On a 98 Startup disk, created from Add/Remove Programs, its in the EBD.CAB file on the Startup disk. For a 98 Startup disk created from FAT32EBD.EXE its on the floppy.

1. Use a Win98 Startup disk (with CD support) to boot your computer.
2. Insert your Win98 CD into the CD Rom drive.
3. At the A: prompt type X:\Win98\Setup.exe where X: is your CD-ROM drive.
4. Proceed with the install. When prompted for the install location, you'll see C:\Windows.000. Choose Other directory and change this to the drive you wish to install 98 to and name the folder Windows (or something else if you prefer).
5. Complete the Win98 install. Allow the computer to boot into Win98.

Repair the Windows XP Boot Loader

1. Create a Win98 Startup Disk
2. Create a Notepad file with the following entries, exactly as shown:

L 100 2 0 1
N C:\BOOTSECT.DOS
R BX
0
R CX
200
W
Q

3. Save the file to the Win98 Startup Disk as READ.SCR
4. Boot the computer with the Win98 Startup Disk and at the A: prompt type

DEBUG <READ.SCR

Steps 1 - 4 create the BOOTSECT.DOS file needed to boot Win98. You may need to use the ATTRIB C:\BOOTSECT.DOS -S -H -R command if BOOTSECT.DOS already exists and you get an error when trying to recreate it.

5. Configure your computer to boot from the CD drive. This is done in the BIOS, or your computer may offer the option at startup if it detects a bootable CD. If your computer does not support booting from CD-Rom, you should also be able to boot with a 98 Startup disk, and run WINNT.EXE from the I386 folder of your XP CD.
6. Insert your XP CD and boot from it.
7. You'll see some files being copied, then you'll be presented with a choice of installing or repairing an existing installation. Choose Repair.
8. You'll be asked which XP installation you want to log into. Enter 1. There is usually only one installation.
9. You'll be prompted for the Administrator password. For Home, the default password is blank, so just hit Enter. For Pro, enter the same password you did during setup for the Administrator account (this is not the same as the password for an Admin level account. It must be the Administrator account password).
10. At the C:\Windows prompt, type FIXBOOT. You'll be prompted to confirm. Do so.
11. When FIXBOOT is finished, remove the XP CD and type EXIT and the machine will reboot.
12. Reconfigure your computer to boot from the hard drive if necessary.

You will now get the XP Boot loader with your choice of operating system.

  woodchip 21:59 04 Sep 06

You cannot load Win98 or ME on any other drive than C:\ without some kind of software that allows multi booting

  alan in spain 22:51 04 Sep 06

thanks fruitbat and all the others that offered help

will let you know how we get on

cheers

Alan

This thread is now locked and can not be replied to.

Surface Pro (2017) vs Surface Pro 4

20 groundbreaking 3D animation techniques

How to mine Bitcoin on Mac