Should I upgrade to Windows 10? Why upgrade to Windows 10? Is Windows 10 good? The pros and cons of!…
Ive been searching for perhaps a more up-to-date method of restoring the region code on my DVD player within the computer. I searched the web-pages but there is nothing more current than around 2006. I would be looking for a free download only - for my needs its not worth paying a down load fee...unless of course it was under a tenner , say. What do u think ?
Would have been very handy , downloads like a dream and easy to use but no affect on Windows media player. Nice try , though Thanks for that.
Media Player has it's own region protection. Try VLC instead.
VLC is the only answer as Microsoft and firmware updates will make no difference. DRM limits.
1 Close out your Windows Media Player and any other program that might used the DVD player.
2 Click the "Start" button to load up the Start menu and right-click the "My Computer" (or "Computer") icon and select "Properties" from the pull-down menu.
3 Double-click the DVD/CD-ROM drive and right-click the DVD drive to bring up another pull-down menu. Select "Properties" once again.
4 Click the "DVD Region" tab and select "Region 2."
5 Click "Apply," and the DVD region is changed. You can now use Windows Media Player to watch Region 2 DVDs.
True but aren't there only a certain number of times you can do this? If I remember correctly it was easy to forget how many time you have already changed it and then get stuck on a region that you don't want.
What's all this about Windows Media Player having a Region Setting?
I thought that the only Region Setting was the firmware in the DVD Drive. And software like AnyDVD etc avoids using the firmware region setting, as does VLC player unless it is an RPC2 drive. A lot of newer drives are RPC2 drives these days. Some of these drives don't allow raw access to the drive until the drive firmware has done a region check.
Region setting There are actually up to 3 region protections on a system: - 1 in the DVD drive - 1 in the Operating System (windows) - More info on Windows region management. - 1 in the software player (eg. WinDVD, PowerDVD...)
When you flash your drive with a region free firmware (RPC-1), you remove the region counter from the drive itself completely, but with this counter gone, the software counters kick in to replace the one from the DVD drive. This means that you still have these other 2 to defeat!!!. An alternate region free solution that is available for some drives is known as an "Autoreset" firmware: Instead of removing the counter from the drive completely, the counter simply resets itself to an unlocked state when the computer is restarted. This way, the drive appears as region protected (RPC-2) but the counter can be changed indefinitely. Creating autoreset patches is slightly more difficult for the patcher, but makes the life of the user easier because DVD Genie and Region Killer are not required as they are for RPC-1 firmwares. On the other hand, it's easy for software manufacturers to detect autoreset firmwares, and if they decide to do so, you will still need a software patch in the long run. This is why RPC-1 firmwares are seen by most as the long term solution.
So, unless a program like DISCInfo http://discinfo.rpc1.org/ or Drive Region Info tells you that your drive is still protected or you used an autoreset firmware, your drive IS region free, and any region counters that you still see come from software region settings.
To bypass that, you need to use programs such as DVD Genie http://www.inmatrix.com/genie/ or DVD Region Killer http://pioneerdvd.rpc1.org/DVD%20region%20killer%20v126.96.36.199.exe (the later is highly recommanded).
Fruit Bat /\0/\, thanks, I 'think' I understand a bit better now.
I have read the above previously and I tried regionkiller - Windows put out a severe warning on downloading from this site so I didnt bother. I am going ahead with the other ideas. As far as VLC is concerned it wouldnt play anything region 1 or 2
This thread is now locked and can not be replied to.