Desktop slow to stop.

  Robboftm 15:23 15 Nov 07
Locked

My desktop has virtually stopped.I have replaced the powere supply as this seemed to happen just after the fault occured.I have also put another 512 of ram in my machine.I can switch the machine on and it loads up to where all the acounts are(Xp by the way)from there the red light that run with the Hard drive just flickers approx every 5 secs.If i leave the pc for approx 10 mins the next screen comes up.I thought if i system restored it might give me some hope but unable to access this progremme.The last thing that i did on it was to run Ashampoo and it found a virus which i deleted.I can access Buos etc but cant seem to make it work this way.I have tried to boot up in safe mode but no difference.

  Fruit Bat /\0/\ 16:49 15 Nov 07

1. Software

a) Clear out all temporay files and folders -- use Crap Cleaner click here

b) Scan for malware spyware and viruses --Free Anti Spyware :-
Adaware click here
Spybot S&D click here
Spywareblaster click here
a2 click here
Windows Defender click here


Free Antivirus software
Avast4 click here
or
AVG antivirus click here

c) Clean the registry -- Free Registry cleaners :-
RegscrubXP click here
Regseeker click here
TweakNow RegCleaner 1.3.2 click here
Easycleaner click here ( Use with care, It advises you to back up the registry first, this is a good idea as it cleans rather aggressively. )

d) Pagefile (Virtual Memory) -- Rght click MY Computer - select propeties - Advanced tab - Performance - advanced tab - Virtual memory click change, you can put the page file on a differnt drive (if you have one), click custom size and set Initial size to one and a half times the amount of memory you have fitted i.e. 512MB memory = set to 768MB, set maximum to double your memory amount i.e. 512MB memory = 1024MB click ok.
If your hard drive is full and there is not enough room for the pagefile this can slow down, freeze or even cause the PC to crash (restart).

  Fruit Bat /\0/\ 16:49 15 Nov 07

e) Cut down on the programs that load at startup -- Start - Run type msconfig - startup tab- untick everything except for firewall, antivirus and antispyware

and the services that run in the background. click here

2. Hardware

a) Hard drives / IDE Channels:

i) Check the transfer rate, you need to have the transfer mode set to DMA not PIO.
Right click My Computer - Properties - Hardware - Device Manager - Expand (click the + ) IDE ATA/ATAPI controllers right click Primary Channel - Advanced Settings Tab -
If transfer Mode is PIO then follow the instructions at click here to change.

ii) Check for errors and defrag your hard drives -- My Computer - select drive - properties - tool tab - Error checking / Defragmentation.

ii) If you are using Windows XP, it's a good idea to convert your system drive to the NTFS file system if you have not already. In addition to providing numerous security and data recovery improvements over FAT32 (the file system of choice for Windows 9x/ME and XP Home) it can also speed up your system slightly.

In fact, the only real reason for sticking with the FAT32 file system for any of your data is if you have more than one operating system on your PC and the other OS's can only see FAT32 partitions (as would be the case with Windows 98, for example, which is incapable of reading NTFS data).

To convert your drives to NTFS:
Right click on 'my computer' and select 'manage'
From the computer management window, expand storage and select 'disk management.'
Using the 'file system' column of the upper pane of this window, you can easily check what file system each of your logical drives is using. Make a note of this information.
Now open a command prompt window by going to 'start\run' and typing 'cmd'
To convert a disk to NTFS, type 'convert (drive letter): /fs:ntfs'
So for example, if you were going to convert your C: drive, you would type 'Convert c: /fs:ntfs' at the prompt.

b) Divers
Obtain the newest drivers for your hardware
This may seem a bit obvious, but keeping your system's drivers up to date can give both your performance and stability a boost. Video card manufacturers release updates especially often, and these can often give "significant boosts" to gaming performance as video card in question is "optimized."

Don't neglect the other components of your system either. Your motherboard manufacturer may have released newer versions of its Input/output drivers for your board, and sound cards and other peripherals can also benefit from newer software.

  bluto1 20:56 16 Nov 07

..

  Robboftm 16:27 18 Nov 07

Thanks for response but the suggestions you make cannot be completed as the pc will not operate looking into or even trying to delete files.Are you suggesting that it is a software/virus problem rather than a hardware concern EG Harddrive no good.

  birdface 16:37 18 Nov 07

Will it run Ok in safe mode.

  Fruit Bat /\0/\ 18:03 18 Nov 07

Repair XP by install over the top of existing systm

1. Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order.

2. When you see the "Welcome To Setup" screen, you will see This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

3. Press Enter to start the Windows Setup.

To setup Windows XP now and Repair Install , press ENTER.

DO NOT choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console).

4. Accept the License Agreement and Windows will search for existing Windows installations.

5. Select the XP installation you want to repair from the list and press R to start the repair.

6. Setup will copy the necessary files to the hard drive and reboot.

Do not press any key to boot from CD when the message appears.

Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.

Repair XP
click here

  Robboftm 01:47 21 Nov 07

No unable to run in safe mode.
Ive gave in and asked a pro to fix it for me.
Let you know his thoughts for other people in the same fix Cheers everyone.

This thread is now locked and can not be replied to.

Nintendo Switch review: Hands-on with the intuitive modular console and its disappointing games…

1995-2015: How technology has changed the world in 20 years

This abstract video touches on division in our technologic world

Best alternatives to iTunes for Mac | Best music players for macOS: Free your music from the…