I would replace the motherboard cmos battery (the round silver one cr2032)
Drivers and Downloads click here= you may have to adjust the Search Criteria
Don't know if you have the manual but is worth a look -
manual click here
System Setup about halfway down page click here
In Table 6. Primary IDE Master Submenu Options
PIO Mode Determines the method of moving data to and from the EIDE drive. Options include PIO modes 0, 1, 2, 3, and 4. The PIO modes can improve the performance of a hard-disk drive. (The higher the PIO number, the faster the transfer; most newer drives support PIO 4.) For the optimum transfer mode, set Type to Auto.
Ultra DMA Sets the Ultra DMA mode for the drive. Options are Disabled (default), Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.