cpu temp

  Dr Grumps 15:09 14 Feb 03
Locked

i have an xp2100 and am someone who is experiencing problems with restarting as mentioned in another thread!

my cpu is getting up to 48oC is that ok?
When should i be worried?

Thanks

Graham

  Gongoozler 15:14 14 Feb 03

Dr Grumps - 48C is fine.

  Dr Grumps 20:37 14 Feb 03

cool thanks

ne ideas when i should get worried

  SantasLittleHelper 21:01 14 Feb 03

My CPU runs at 53C with no problems, I might get worried when smoke comes out of the back of the box! LOL

  Gongoozler 22:05 14 Feb 03

Dr Grumps, the lower you can keep the temperature the better, but I think a general rule of thumb is for the cpu to be in the low 40s when idling, and no more than about 55C when working hard. I think AMD specify the maximum temperature as about 80C, but this would not be conducive to a long life. With fan cooling you should be able to get the temperature to within 10C of the case internal temperature, so it is also a good idea to keep the case well ventilated.

  smcarlsen 22:31 14 Feb 03

I have an xp2000 cpu and am managing to get my temps to about 26c idling and about mid 30s when working (hard). My cooling solution is the Zalman flower cooler but the overall best was the Thermaltake Volcanoe 7+, I was getting temps in the high teens with that, the only down side was the noise. If you plan to overclock you need to get lower temps.

When working hard, my XP2000 has been getting into the high 60's which is a bit worrying. I brought the "processor in a box" so it came with an AMD approved heatsink/fan. I also have a Coolermaster case fan so I would have expected a lower temperature.

Idle temp is about 53.

Any suggestions on a better cooling system would be appreciated as I don't know what a Thermaltake Volcanoe is.

Many thanks.

  Gongoozler 09:53 15 Feb 03

The Zalman web site has information on all there coolers:-
Zalman click here
You can get them, and several others from Overclockers click here. This is a well respected company specialising in products of interest to those who want to push their pc's to the limit.

The Thermaltake Volcano is described on the Thermaltake web site click here
It is available from Dabs
click here

Are there any problems associated with removing an existing heatsink/fan as I am now considering replacing the one that came with my processor.

  Gongoozler 11:06 15 Feb 03

JamesF, the only problem with removing the existing heatsink is the risk of breaking the lugs off the processor socket. You need to press down quite firmly with a flat bladed screwdriver on the heatsink clip to release it, and if you are not very careful you can break the socket lug. If that happens you may need a new motherboard.

You will also need to wipe all the heatsink compound from the processor before fitting the new heatsink.

  professor 16:32 15 Feb 03

ive built two identical systems(one for me the other for a mate)and found that the CPU's generally operate slightly differently for example my mates XP cpu(1800+)when first turned on runs at 38c i think it was where as mine runs at 43c when first turned on(1800+)cpu

but as a rule a cpu even after being on for say about 3-4 hours wants to reach a max temp of about 65-69c and not go any higher than that

prof

This thread is now locked and can not be replied to.

How to get Windows 10 for free | How to install Windows 10: There is still a way to avoid paying…

1995-2015: How technology has changed the world in 20 years

Alex Chinneck’s giant ice cube Christmas tree at Kings Cross

Apple rumours & predictions 2017: The iPhone 8, new iPads, and everything else you should expect fr7…