connecting dvd writer ?

  fire 11:00 11 Jun 03
Locked

i have a cdrom/dvd rom and a cdrw unit already attached to my pc if iwanted to attach a dvd writer would i have to remove one of the devices or could i have all 3 attached. any help please

  -pops- 11:04 11 Jun 03

You DVD writer will do the job of all the others.

You may wish to remove the CDRW unit as it really is excess baggage but retain the CD/DVD ROM to save werar an tear on the much more expensive writer.

Brian

  -pops- 11:05 11 Jun 03

werar an tear?? wear and tear - sorry

  fire 11:07 11 Jun 03

is it possible to have all 3 connected or is the limit 2....

  Quiller. 11:09 11 Jun 03

If you have a spare IDE connector, then yes you can install it. There is no reason why you should not have multiple cdrom \ dvd \ dvd-r \ cdrw.

It will just come up as a plain cdrom till you install the software.

Your main problem will be, on which IDE channel shall I put it. This will depend on what you wish to use it for. Backing up files, video editing, disk copying etc.

ps some recorders can be funny and want to be master on there IDE channel.

  fire 11:12 11 Jun 03

on the gigabyte board i have 2 connectors one being used by hd and 2nd by cd/dvd, so i take it i cant........

  -pops- 11:15 11 Jun 03

The fact that some recorders can be temperamanetal as to where they live, like bsod says, was one of the reasons I suggested removing the CDRW. There really is little point having all three connected at the same time.

You might even be able to sell your redundant CDRW.

Brian

  Quiller. 11:28 11 Jun 03

Yes you can. Some drives are temperamental while others are quite happy to be a slave.

There is no reason why you cannot move your hard drive to primary slave or secondary slave, if you have to.

So long as you have the spare IDE connector and are prepared to do a bit of swapping of cables, if need-be.

Other alternatives are; get a raid board( drastic) or a PCI controller card that would give the option of 4 other IDE devices.

  Rowey 11:50 11 Jun 03

Your boot hard disk has to be master surley?

You can set your dvd writer to secondary master, and put your other cd drives as slaves on each of the ide channels.

You can have all 3 cd drives and the hard disk running.....but what's the point in having a CDRW drive when the dvd writer does that job?

  -pops- 11:55 11 Jun 03

but what's the point in having a CDRW drive when the dvd writer does that job?

That's what I'm wondering.

  Rowey 12:12 11 Jun 03

that's what i put at the end of my last message!

This thread is now locked and can not be replied to.

Huawei P10 review

1995-2015: How technology has changed the world in 20 years

An overview: What leading creative agencies are doing to improve diversity

New iPad, iPhone SE & Red iPhone 7 on sale now