connect two computers through IEEE 1394

  jokerxp 11:16 11 Jul 03

i have a laptop PC with firewire port and a desktop Pc with firewire port too...

i heard that i can connect two computers with firewire..

i tried to do it.. but i had problems..
by the way i have windows XP professional on both computers...

please help me connect the two computers...

many thanks

  Quiller. 11:35 11 Jul 03

From the help and support centre.

Using IEEE 1394 (FireWire) Devices with Windows XP
The information in this article applies to:
Microsoft Windows XP 64-Bit Edition
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
This article was previously published under Q310433
If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:
click here <click here>
This article describes the Institute of Electrical and Electronic Engineers (IEEE) 1394 standard and how to use IEEE 1394 with Microsoft Windows XP.

NOTE: Apple Computer FireWire is a common implementation of the IEEE 1394 standard.
IEEE 1394 Capabilities
The IEEE 1394 standard defines a high speed serial interface that can be used to connect peripheral devices, for example, printers, scanners, and cameras, to your computer. Some common features of the IEEE 1394 standard are:
A simple plug and socket connection. This connection is visually similar to universal serial bus (USB) connections, although USB and IEEE 1394 are not compatible.
The capacity to have up to 63 devices connected serially (in series) to a single port.
Data transfer speeds of up to the rate of 400 megabytes (MB) per second. (The maximum speed is presently 200 MB per second.)
Thin wire cable.
Hot plug and play capability. (You do not need to turn off a computer to connect and use a peripheral device.)
The ability to chain devices together in a number of different ways without terminators or complicated setup requirements.
The ability for IEEE 1394-compliant devices to connect together without the use of a computer (for example, when you are dubbing video tapes).
Asynchronous communication for batch or packet data transfer and storage.
Isochronous communication for real-time voice and video transmission, and any other program that is better-suited for streaming data transfer.
Devices as far apart as 4.5 meters (nearly 15 feet) can be connected.
IEEE 1394 on Windows XP
Windows XP has built-in IEEE 1394 support. To use all the capabilities of the IEEE 1394 standard, your computer must have an IEEE 1394 adapter installed. If your computer has a FireWire adapter, the adaptor is IEEE 1394 compatible. Some of the capabilities of a Windows XP-based computer with the IEEE 1394 standard are:
Instant network connectivity by plugging two or more computers together (no additional hardware or software required).
End-to-end throughput of over 50 Mbps with plenty of digital bandwidth remaining for demanding audio-visual programs.
Transmission Control Protocol/Internet Protocol (TCP/IP) over IEEE 1394. This feature makes it very easy to share a single Internet connection when you connect one computer to the Internet and then connect more computers to the first computer. The Windows XP built-in Internet Connection Sharing feature provides the necessary software support.

NOTE: Internetwork Packet Exchange (IPX) and other networking protocols are not supported.
The ability to use IEEE 1394 drivers for peripheral devices. These drivers are provided by the manufacturers of the devices.
Windows XP comes with full support with IEEE 1394; you are not required to install any software. If you need to install an adapter, simply plug it in to an available adapter slot, and Windows XP completes the installation.
To install an IEEE 1394 device, your computer must have an IEEE 1394 adapter. If it does, then you are only required to plug in the device.
The IEEE 1394 drivers that you may need are provided by the manufacturer. Most IEEE 1394 devices do not need special drivers.

Have you checked in device manager to see if the IEEE1394 port is enabled.

  jokerxp 11:46 11 Jul 03

thank for the info

but i need the steps for connecting two computers

i mean how do i connect in simple steps

  Chegs ® 12:11 11 Jul 03

....Instant network connectivity by plugging two or more computers together (no additional hardware or software required.......

I don't know if you need to cfg the connections at each puter(but would assume you do need to tell the puter to "talk" to IP *.*.*.*)

  Quiller. 13:04 11 Jul 03

Yes as stated above. If your ports are enabled in the bios and present in device manager. The physical connection of the firewire cable should bring instant access to both machines.

Or simple steps.

Go to device manager on both machines and see if the IEEE 194 bus host controllers are present and have no problems.

Connect a firewire cable, not a usb, they should not fit anyway, from desktop to laptop. See if they find each other.

  Gaz 25 16:08 11 Jul 03

If I connect a USB on one PC to a USB on another does that do the same, could have saved me a lot of money?

Mind u, better to have a file server I suppose.

  Chegs ® 16:17 24 Feb 04


This thread is now locked and can not be replied to.

Nintendo Switch review: Hands-on with the intuitive modular console and its disappointing games…

1995-2015: How technology has changed the world in 20 years

Method Studios' title sequence for BBC series Taboo is truly unsettling

Best Pages for iOS tips | How to use Pages for iPad & iPhone: 7 simple tips to get more out of…