Clone IDE to SATA

  dlguk 12:25 PM 19 Jan 12
Locked

I am replacing and 8 year old IDE only (120G and showing errors on AdvancedSystemCare Pro)drive with a SATA drive, the PC is a Dell Dimension 4600 which supports SATA. Could you tell me how to clone my old drive to the new one? I have ‘Paragon Hard Disk Manager 11 Suite.
Thank you

David

  rdave13 12:42 PM 19 Jan 12

Haven't much time to reply (work beckoning) but you can connect the sata drive to motherboard or use a usb caddy (I prefer this), open hard disk manager 11 and find (copy hard disk)link on left hand side. This will start the wizard and will show you the hard drives and how to copy one from the other.

  robin_x 12:56 PM 19 Jan 12

Run chkdsk first on the old drive partition(s).

It will find and attempt to fix bad sectors which may not be copied or even cause an error during cloning.

  Graphicool1 13:00 PM 19 Jan 12

I use 'USB 2.0 to IDE & SATA Cable' you can get them with or without a power adapter...CLICK HERE

  dlguk 13:15 PM 19 Jan 12

Thank you all. rdave13 would ‘Hard Disk Migration’ do the trick?

  onthelimit1 13:51 PM 19 Jan 12

The drive is probably Seagate or Maxtor. If so, why not use their own cloning tool (based on Acronis). Very easy to use. From Here

  dlguk 19:47 PM 19 Jan 12

Thank you onthelimit1, I have as yet not purchased the drive, I don’t know if you have noticed the price since the floods in the east took out the plants. I am however going to have to order soon as the drive could fail anytime, it sounds ok but it is old and as I have said, error reports. Seagate I would buy Maxtor no but thank you for that link, it will probably be a 500G Seagate. I think I wasted my money with Paragon (can’t get support).

  onthelimit1 19:58 PM 19 Jan 12

The seagate tool is free download.

  rdave13 23:59 PM 19 Jan 12

Unfortunately I haven't upgraded to Paragon HDM 11 yet, still on 10, but if you open the program and select help in the menu bar then help again in the dropdown menu then you'll get all the info you need on how to use the software. If on disk view you can right click the hdd and run a file system integrity check and also test the surface. It's a powerful piece of kit and you should really study the instructions carefully under the help menu. Good luck.

  dlguk 18:31 PM 20 Jan 12

Thank you rdave13,

The user interface is quite a bit different on 11 and the manual is like war and peace, which is ok if you know what you’re looking for but my head is spinning with it. I made a screen shot of HDM 11 but then discovered I couldn’t send it. Maybe I should just save data and replace the drive and install XP Pro and programs. Regards

  rdave13 23:15 PM 20 Jan 12

The help files are there so possibly start from scratch and have a read through. Whatever or which ever program you use to clone always make a backup of your documents, photos etc, first. What I've seen on Google for the 11 version it looks like you need the 'migrate disk' option. Search the index in the help section. Save the data so now you can have a go with Paragon and if it goes belly-up (doubtful) then you've lost nothing. One good thing about Paragon is you can't do any damage unless you finally click "apply" and you get enough warnings about what you intend to do. It really is a good program and now fully supports SSDs.

Advertisement

This thread is now locked and can not be replied to.

How to get free stuff for Android: Amazon Underground offers genuinely free Android apps and free…

1995-2015: How technology has changed the world in 20 years

Swedish schoolkids use Minecraft to redesign Stockholm city centre

Apple's special event invitations decoded: A look back at 13 of Apple's most cryptic invites