Can't remember how to FDISK?

  Will 13:05 12 Sep 05
Locked

I have cobbled together a computer out of spare parts I have after upgrades etc. It is a 1400Mhz, 512ram, and has 2 HDD (6&20). The disks have XP installed but I want to wipe both of them clean and install Win 98SE so I can run a video to digital card which I bought when I had only a 400Mhz and was purgotoy to use because it was slow. It is a pinnicle product and they told me the system only works on Win 9X. Can some one advise me on the procedures on how to clean the disk. Thanks as always.

  lotvic 13:12 12 Sep 05

are the hard drives (at present) FAT32 or NTFS?

  Graham ® 13:16 12 Sep 05
  pj123 13:33 12 Sep 05

Download a Win 98SE bootdisk from click here

Set the BIOS to boot from floppy first. Put the bootdisk in and switch on.

When you get to A: type in fdisk and enter.

If your hard drives are NTFS you will see somewhere in the Fdisk menu an item referring to non DOS/FAT partitions (or something like that, can't remember the actual wording) You need to delete all those partitions and then run fdisk as normal. Don't forget to make the primary partition active and then format it. Do the same for the other hard drive.

This thread is now locked and can not be replied to.

Huawei P10 review

1995-2015: How technology has changed the world in 20 years

An overview: What leading creative agencies are doing to improve diversity

New iPad, iPhone SE & Red iPhone 7 on sale now