LG G6 review: Hands-on with LG’s bold, big-screen shot at perfection
I have just got a wireless router and set it up for wireless ...no worries (WHooHOO!).
I want to set up a home network with my desktop PC (always connencted to the router via LAN) and my laptop (maybe via wireless or via wired LAN).
Bottom line is that I want to save a load of files from my desk top to me laptop before I fresh install windows in to the desktop.
I run on XP and have tried busking via some of the 'control panel' menus but got no where.
Setting Up a Broadband ADSL2/2+ Modem/Router/Wireless 54Mbps with 4 Port Switch
It is strongly recommended by All router suppliers that you use a physically connected cable
to the Router via a Ethernet RJ45 cable for router setup.
Using a wireless connected computer for setup is Not recommended to access router setup at any time.
Do not power on the ASDL Modem/Router
Remove Telephone from wall jack if install
Plug-in the 2-way filter that came with Modem/Router
Connect Telephone Cable that came in the box to the ASDL/DSL Socket on Filter and to the ASDL socket on the Router
If you had a Telephone connected to the wall jack before, plug the phone into the socket on the filter mark Phone
If you have any Phone extensions, Fax Machine, Answering Machine, etc, an ADSL filter must be installed on each wall jack
Connect a second RJ45 Ethernet cable from Port 1 on the Router to the LAN socket on your Computer
Power up the computer Only and check the following:
Web Browser Settings
Internet Explorer 4.0 or Higher
Start IE web browser. Select “Tools” then “Internet Options”- “Connection Tab”
In the “Connection” screen, there are three selections:
“Never dial a connection”,
“Dial whenever a network connection is not present”
“Always dial my default connection”.
If you can make a selection, select “Never dial a connection”.
If you cannot make a selection, select “LAN Settings”
Make sure there are no check marks next to any of the displayed Options:
“Automatically detect settings”,
“Use automatic configuration script”
“Use a proxy server”.
Click “OK”. Then click “OK” again in the “Internet Options” page.
Network Adapter Setup on all Computer
Also called a LAN card (Local Area Network) or NIC card (Network Interface Connection)
Click “Start”, “Settings” Network Connection
Double-click on the “Network Connection
Left-click on the “Local Area Connection” associated with your network adapter
Select “Properties” from the drop-down menu.
In the “Local Area Connection Properties” window all boxes should be ticked
Tick the box “Show Icon in Notification Area When Connected,
An Icon will appear in the task bar when you have finish the setup
Click “Internet Protocol (TCP/IP)” Click the “Properties” button
Select “Obtain an IP address automatically
Select “Obtain DNS server address automatically”
Do Not Change Any Other Setting
Your computer network card is now configured for use with the Modem/Router
Other Network Connection Setting
Click-Start- Setting-Network Connection-New Connection Wizard
Select-Connect to the Internet-Next
Select-Set Up My Connection Manually-Next
Select-Connect using a broadband connection that is always on
Also check the Lan card is not being powering off by Windows XP
Right click on Local Area Connection Display Icon on task bar
At the top of display the type of Lan card will be displayed
Click Configure- Click-Power Management Tab
Untick if tick- Allow Computer to power off this device to save power
If working tick solved box
have been away on business - will play at weekend
This thread is now locked and can not be replied to.