Asus P4PE Boot Problem

  old-one 14:34 10 Mar 03
Locked

Have just installed a new Asus P4PE motherboard.
POST checks out OK.
It Boots until the Message:"No drive attached to FastTrak controller.The Bios is not installed.
Any suggestions please.

  rct 16:29 10 Mar 03

Disable the additional IDE ports/S-ATA ports in the BIOS unless you intend to use them.

  old-one 17:24 10 Mar 03

Thanks rct. Sorry for delay in reply. Did what you advised. Got rid of error message. System still will not boot past the same point. That stupid voice keeps saying "completed self test now booting from operating system". but it does not. Just keeps cycling round repeating its self.

  rct 17:41 10 Mar 03

Hmm, I'm a tad confused... not familiar with this particular mobo you see! Is HDD-0 set as the 1st boot device? Disable other boot options.

So are you trying to run an existing installation on your new mobo? If you are, it's kind of a bad idea! If you are running XP, I suggest you carry out a "repair" procedure using the set-up CD-ROM.

Two other things to try:

set your HDD jumpers to master/slave rather than using CSEL(cable select/automatic)

Check out Asus to see if a BIOS update is available for your mobo, it may correct the problem you're experiencing.

Good luck ;-)

This thread is now locked and can not be replied to.

Nintendo Switch review: Hands-on with the intuitive modular console and its disappointing games…

1995-2015: How technology has changed the world in 20 years

Method Studios' title sequence for BBC series Taboo is truly unsettling

Best Pages for iOS tips | How to use Pages for iPad & iPhone: 6 simple tips to get more out of…