Asus A7N8X + Athlon XP2500

  suffolk lad 00:30 26 May 03

Just built a new PC using the above plus 512 Meg DDR Ram. When running through POST, the CPU is either reported as XP1100 or not reported at all; also ram is not reported correctly at 100 MHz only. Appears to run OK. Have blown bios with latest release (1004) from Asus website. Any suggestions gratefully accepted.

  User-312386 00:33 26 May 03

latest bios update is 1006

  User-312386 00:33 26 May 03

have you loaded asus update from MOBO disc?

  kane_2002k 01:15 26 May 03

fsb may be wrong should be 166fsb, seems like yours is 100fsb. For 2500xp (barton core) mulitpler is 11 so 100x11=1100ghz wheres 166x11= ~1.83ghz, make sure that it is set to 166fsb. Also i believe this board has a jumper to the left of the hefty heatsink, the should be set to 1+2 to enable 133/166fsb (maybe shown as 266/333 in manual - same thing). If it is on pins 2+3 then only 100fsb is enabled.

  kane_2002k 01:20 26 May 03

I have deluxe version of board so there may be a difference where the jumper is located

  The Pretender 06:27 26 May 03


  Rayuk 09:11 26 May 03

There are a few versions of this board
Deluxe versions 1.04 & 1.06[Bios 1004]
also there is version 2.0 which uses different bios which have a C in front ie C1005[which is the latest on boards download page]
Go into bios and check on Advanced Chipset Features for cpu settings and memory also and report back

i'll be building my firts pc and have seen this mob ad vertised local as
asus a7n8x d/lan/audio/1394/sata/8agp at £121

can anyone tell me what the d and sata mean
also is the audio 5.1 or better with an audigy.

how large a prossesor can you up grade over the months and years ahead.
general info please would be most helpfull

  User-312386 15:44 31 May 03

SerialATA, Dual network ports, Dual channel DDR400 support, ATA133, Dolby sound and firewire on board.

  Rayuk 16:33 31 May 03

Go here will give you all the info you need on this board
click here
Also you should be able to pick it up online for £96-98 + p&p.
If you can try and get rev.2.0 board.
To note you need to get twin pairs of memory to run dual channel in this board.

thanks madboy33 & Rayuk for your help
good web site
how about cpu whats the highest this mob supports
thanks again

This thread is now locked and can not be replied to.

Huawei P10 review

1995-2015: How technology has changed the world in 20 years

How VR is being used to simulate space

New iPad, iPhone SE & Red iPhone 7 on sale now